Correction screen color and contrast of the arcade scan line

Some non-hard screen LCD display or some notebook display, due to the reasons for the work is not in place, the screen contrast and color will have a certain degree of distortion. For example, white does not look pure white, but some of the yellow or other colors, such as non-wide-angle display, different angle of view will be a little change, then do not want to replace the new display in the case of how to solve the problem? This article is to introduce is the solution to this problem.

In the arcade scan line (official version), there is a software that comes with a scan mode-non-scanning brightness adjustment. In the old version of the class scan without adding a custom configuration tool, this mode can only be used for a single brightness adjustment, it is understood as: the original screen brightness as 0, black as 255来 take 0-255 of the intermediate transition value, that is, the transparent value (a in ARGB). In the latest version of the arcade scan line _V10 (official version), the author resets the custom Configuration tool, the Debug window has been separated from the main window, support background transparent, window transparent, instant debugging, we are using this tool to only support a black non-scanning brightness adjustment becomes a screen color correction tool that supports RGB color values and contrast. In theory, RGB color values have 255*255*255=16581375 color, and our calibration tool supports a color value of 16581375-1 (transparent color) = 16581374 colors, let's look at the tools we need to use first.

Yes, that's it, here's how to use this tool to correct distorted screen colors.

The first is to download the software, you can download the Software homepage: Arcade Scan Line _V10 (official version)

Unzip to any directory after download, run the arcade scan line _V10 (official version). EXE software interface as shown in:

Click the Start menu, select the custom configuration mode Suite option or the shortcut key ctrl+shift+f2, go to Custom mode, 1 (the first picture at the top of the article), then open a long plain white picture or open the browser, or other bright contrast can see the color of the program. Drag the Visual debugging area to the contrast of the program window, the mouse near the visual debugging area to change the resolution of the Debug Area window, after the configuration of the various data to the same as "as shown", you can begin to adjust color and contrast.

To achieve correction color and contrast only four configurations need to be adjusted, that is, the RGB primary color on the left side of the figure, R (red) is red, G (green) is green, and B (blue) is blue. Transparent to the right (Alpha). Can be adjusted according to the reality of their display, until their own satisfaction.

After configuring, click on the tool's Start menu, first select the "Save to default Configuration" option or shortcut key ctrl+d, and then select the Close tool to enter the preview mode, you should see a solid color interface, because this tool does not save the transparency configuration, click on the Start menu, select "Smart Adsorption Window" option or shortcut key CTRL+SHIFT+F1, enter the smart adsorption state, move the mouse to the upper left corner of the screen, press the keyboard any key lock window after entering the console, you can adjust the transparency, you can set your own. As shown in the following:

If the scan area is not full-screen, just click on the "Full Screen windowing" option or the shortcut key SHIFT+F12 the resolution menu in the console.

Although this tool is not mainly for correcting screen color and contrast development, but through this tool is actually able to achieve the correction screen color and contrast, and high degrees of freedom, correction is also good, and finally hope that this tool can help people who need help.

Software Home: Arcade scan line _V10 (official version)

The software is not looking for anything!

Correction screen color and contrast of the arcade scan line