Preparations:
1. One CD recorder. A dial (if you don't have any friends, you will use the GHOST to crack it)
2. One broken machine ~
3. Three NICs 8139-530
4. Hard Disk Space larger than 1 GB
Software requirements:
Any routeros version
Http://www.router.net.cn
There are ISO cracking images and GHOST cracking versions.
RouterOS
2.8.18 installation text tutorial
Only the installation process. It is installed until it can be controlled using winbox.
After unpacking, burn the Ros01.iso in the package to a bootable disc. The hard disk of the machine is set to IDE0, that is, the primary disk of the first IDE channel.
Bios sets the CD boot system and puts it into the CD boot machine to get the following picture
Figure 1
Select 2: Install RouteOS
Wait a moment after 2.8.18 and get the following picture:
Use the arrow keys and spaces to select the required modules and press the "I" key to confirm the installation. I will ask you again to continue? Yes or
No ?, Press "Y"
Figure 2
Then I asked: do you want to keep
Configuraton? Do you need to keep the old structure? Press "N".
Then, automatically format the disk, install the core, and install the module. Last tip:
Press ENTER
Reboot: Press enter to restart the machine.
Graphic installation tutorial for RouterOS 2.8.18
Only the installation process. It is installed until it can be controlled using winbox. I am working on the remaining configuration process. It's complicated.
Ros2818 optical disk with cracking and simple tutorial:
Ftp: // up: up@220.160.54.129/routeos0000c80000ed0000c20000b70000d30000c9.rar
After unpacking, burn the Ros01.iso in the package to a bootable disc. The hard disk of the machine is set to IDE0, that is, the primary disk of the first IDE channel.
Bios sets the boot system of the CD, and puts it into the CD to start the machine. The following figure is displayed:
Select
2: Please wait after installing RouteOS 2.8.18.
Use the arrow keys and spaces to select the required module function and press the "I" key to confirm the installation. I will ask you again to continue? Yes or
No ?, Press "Y".
Then I asked: do you want to keep
Configuraton? Do you need to keep the old structure? Press "N".
Then, automatically format the disk, install the core, and install the module. Last tip:
Press ENTER
Reboot: Press enter to restart the machine.
After the reboot, the boot screen shown in Figure 1 appears. (if it does not appear, the boot screen is directly displayed on the logon page.
Select 3: Crack
RouteOS Floppy
Disk to start cracking.
The cracking process is in Chinese. If your hard disk is at IDE0: 0, the attack will not be a problem. Otherwise, the system file may be damaged, and the 0123456... loop may occur at startup.
Ask if you want to restart. Remove the disc and Press Y to restart
Figure 3
Start logging in After restarting. The initial username admin. The initial password is empty.
Why? How can I prompt registration information and Soft?
ID?
It turns out that you still need a command to activate the registration patch:
Enter the command:/system license import
File-name = key
Or/sy lic I f key
Then you are prompted whether to restart. Restart by Y
Figure 4
Restart and run "admin": "After logging in, the system prompts that the registration information has completely disappeared and is now in the official version.
IP address set for running
Command setup
Figure 5
Select A (the third option) to configure the IP address and gateway.
Figure 6
Press "A" to add an IP address.
Figure 7
Connect the network cable to the internal network card. When the network card works normally (after the work light is on), select the default network card:
Figure 8
Set the IP address and subnet mask of the default Nic according to your actual situation. For example, if the IP address is 198.162.1.188 and the subnet mask is 255.255.255.0, set 9:
Figure 9
After completing the preceding settings, press "g" to set the default gateway.
Figure 10
Nic settings
Download Winbox with the username "ADMIN" and the password blank. After successful connection, you can see the Winbox user interface.
Figure 11
If you disable the other two NICs outside the Intranet, enable them, and select "Interface" on the function menu to open the NIC Settings dialog box. The other two NICs are mainly used for broadband access. If one of your broadband access networks is CNC Netcom and the other is telecom, you can change the name (12, 13 ), of course, the name of the NIC should be nice to you, and there are no special requirements.
In "IP -- address", we can see the configured IP address. Since we only configured one network card with an intranet, the list contains only one Intranet IP address (figure 14 ).
Figure 14
Continue with the NIC configuration described earlier. Configure IP addresses, subnet masks, and default gateways for the two NICs on the Internet (15 ). Here, we set the IP address/gateway of the CNC Nic to 222.222.222.222.
/222.222.222.223. The IP address/gateway of the NIC is set to 111.111.111.111/111.111.111.112.
Figure 15
Note that when you configure two NICs for Internet connection, the default Nic must be the same as the Intranet Nic. Otherwise, two IS (16) are displayed when you view the IP--ROUTERS, which means you have configured three different NICs for the three NICs. In this case, you can use the "-" button on the toolbar to delete two invalid IS. 17 in the list.
Figure 17
Switch to the "Tables" label and create a Netcom route table named "CNC:
Click "+" to configure the created Netcom route table. Destination is the meaning of the target network, retain the settings; Gateway is set to the Network Gateway: 222.222.222.223
Add two route tables, netwatchmain (20): Destination Address 111.111.111.112/32, Gateway 111.111.112; netwatchcnc: Destination Address 222.222.222.223/32, and gateway 222.222.222.223 (21 ). When one of the two lines goes down, two rules can be created through the two route tables to force China Telecom and China Netcom gateway to use these two rules, so that automatic switching between the two lines can be performed.
After completing the preceding settings, you may find that the Destination values of China Telecom and China Netcom are both 0.0.0.0/0. Isn't this a conflict ?! At this time, we can go to "Rule" to modify the rules, but before we go to FTP, upload a CNCRULE. RSC File
Enter "FTP: // ROUTEROSIP" in IE, the account is admin, And the password is blank. Copy the file
Starting from: http://hi.baidu.com/hywangyc/blog/item/ce0d30fa43f252899e51462d.html
