Cracking telecommunication's Huawei HG520s router configuration

1. log on to 192.167.1.1 and enter the username and password admin;

2. Open the blocked pppoe dial-up page: http: // 192.168.1.1/phtml/mpvc/add_pppoe.html, and the port ing page is: http: // 192.168.1.1/phtml/nat/nat.html; click "allow" for the NAT option ".

3. If the channel has 8/35, delete it first, and set it to 8/35 Guangzhou on the pppoe settings page );

4. Enter your broadband account and password;

5. Save and exit on the original interface.

6. Go to [VLAN binding] under the [advanced] menu and edit the settings of the four ports and wireless ports. The specific setting is to delete the PVC of all non-PVC-78/35 ports, add PVC-78/35) bind, change default to PVC-78/35 ). Go back to [VLAN settings] and you can see that the PPPoe option is checked.

7. Change the [local connection] TCP/IP protocol on your host to the local DNS.

8. Complete.

Related Articles]

• Router Configuration Guide for Huawei R2501
  

• One Huawei router configuration that uses multicast and Qos
  

• Simple configuration of Huawei Router