Create a USB flash drive, start and install win7

Now many people no longer need the optical drive, and because the optical drive is not used for a long time, it will cause damage to the optical drive. In this case, if you want to install the win7 operating system, you need to use the USB flash drive.

1. First download the ISO image and ultraiso of win7, as shown below:

Windows 7 SP1 flagship edition (x86)

Ed2k: // | file | cn_windows_7_ultimate_with_sp1_x86_dvd_618763.iso | 2651877376 | d6a0d9fdb8c67a65b92b4c1ac197rjc |/

Ultraiso

Http://ishare.iask.sina.com.cn/f/6621978.html? From = isnom & retcode = 0

(SINA's, 0 points, with a registration code)

2. After ultraiso is installed, open the application.

Note that there may be permission issues in win7. Right-click the ultraiso icon and select "Run as administrator" (1 ).

Figure 1

3. Open the ultraiso application, as shown in figure 2.

Figure 2

4. Click "file"> "open", as shown in 3.

Figure 3

5. Select and load win7 in the "open dialog box", as shown in 4.

Figure 4

 

6. Click "start"> "Write hardware image", as shown in Figure 5.

Figure 5

 

7. In the displayed dialog box, perform the following operations.

Figure 6

Note: If you want to insert multiple USB flash drives into your computer, do not select an incorrect one. If you want to insert a USB flash drive, the system will format the USB flash drive. Make sure that no important data exists in the USB flash drive.

8. Start writing. Wait for a while before the writing is completed. 7.

Figure 7

Author: PANG Hui

Source: http://www.cnblogs.com/pang123hui/

This article is based on the signature 2.5 mainland China license agreement. You are welcome to repost, interpret, or use it for commercial purposes. However, you must keep the signature Pang Hui (including the link) of this Article ).