1, in the WIN10 desktop we press the keyboard "win+x" key combination and then find the menu under the "command Prompt (Admin)", we click on it to open:
2, in the open cmd interface we enter: netsh wlan set hostednetwork mode=allow ssid=123456 key=123456789, click Enter.
The SSID is the Hotspot name key for the hotspot password, as shown in the following example:
3, this password is the WiFi password, the length we know is to 8-bit:
4, enter the Netsh wlan start hostednetwork, open the hotspot, as shown in the following image:
5, after the hot start, we click "Change adapter Settings" in the control Panel will create a local connection, the last need in the wireless network properties, share this link. As shown in the following illustration:
7, other computers can directly enter the WLAN we have just created or search after the password can be entered through our computer network Internet.
Note: This hotspot is through our computer to the Internet, so the traffic is all counted on your computer Oh, at the same time connect a lot if your computer configuration is not good may affect your use speed.