1, open UltraISO PE Click "File"-"open", find the beginning of that PE ISO image file, that is, the perfect U disk PE maintenance system. ISO, open.
2, click "Boot CD", select "Write Hard disk image ..." ", the DOS boot disk was selected before the ZIP mode of operation, so here the" write mode "select" usb-zip+ "(if the above you choose the HDD mode of operation, here you choose the" usb-hdd+ "write way).
3, click "Convenient start", "Write new drive Boot Sector", select "WINDOWS nt/2k/xp".
4, then click on "Easy to start", select "Convenient write", OK.
5, this made a U disk PE boot disk, press del key or F2 into the BIOS settings, the boot first boot set to Usb-zip startup (specific settings refer to their own motherboard instructions), press F10 Save settings Restart, you can enter the perfect u disk PE system.
After the completion of the PE boot disk, plug in the U disk, boot into the BIOS setup from the Usb-zip start, you can access the U disk System.