CSCL RTK is a mobile card using the instructions built-in network settings

CSCL RTK Use instructions, CSCL RTK built-in network, CSCL network RTK, CSCL RTK using mobile card built-in network how to set

Hand-thin Model: IHAND20 Android system hand-thin

Software: Hi-survey Road\elec

Instrument: CSCL company arbitrary RTK Products

How to set up the built-in network using mobile card in CSCL RTK?

Mobile card built-in Network network RTK Setup process:

1, set the base station transmit signal, the data link selects the internal network.

2, set the mobile station to receive the signal, the data link selects the internal network, obtains the fixed solution.

3, pay attention to the base station and mobile station IP, port, group number, group number to set the same!

1, set the reference station transmit signal.

1.1 Hand Thin Connection Datum station

(Reference Station No.: 10903689)

① Incoming Device connection

② Click Connect

③ Search Equipment

④ Select the corresponding body number

⑤ pairing, or entering a pairing password 1234

The ⑥ has been connected to 10903680

1.2 Setting the reference station transmit signal

Base station 10903680 set as reference station

Smooth acquisition of coordinates in the ① receiver

Select BLH (default) in the receiver, click the Smooth capture icon to collect coordinates.

If the coordinates are not smoothed, the Datum station does not emit the signal!!!!

② Base Station Data Link Select built-in Network

Server: select guangzhou 2

IP: 202.96.185.34 (automatic change)

Port: 9000 (automatic change)

Group number:0871119 (telephone area code +<255 three-digit)

Group number: <255 (three digits)

③ other in-message format selection RTCM3.2

④ settings

Click Yes or not?

Base station host lights do not flash, point No, reset the base station!

Base station host Beacon green light is flashing, switch server ip\ port try to connect again

Base station host signal light green solid not flashing yellow lights, re-smoothing collection set Datum station!

Base station host lights green solid interval flashing yellow light, point is, disconnect with the reference station!

2, set the mobile station to receive the signal

2.1 Hand Thin Connection Mobile Station

(Mobile Station number: 10012816)

① Incoming Device connection

② Click Connect

③ Search Equipment

④ Select the corresponding body number

⑤ pairing, or entering a pairing password 1234

The ⑥ has been connected to 10012816

2.2 Set the mobile station to receive signal

Into the mobile station to set 10012816 as the mobile station operating mode

① Mobile Station data link settings

Server: same as base station settings!

IP: Same as base station settings!

Port: Same as base station settings!

Group number: same as base station settings!

Group number: same as Base station!

IP address, port, group number, group number must be the same as the base station settings to receive the signal!

② other

Message Format Selection RTCM3.2,

Other default, PPK off, Beidou satellite open, GLONSS satellite open!

③ settings

after the mobile station is set up successfully, the mobile station connects to the server, receives the signal (the mobile station host lights the green solid interval flashing yellow light) Wait a moment, the hand thin will display " fixed "

----------------------------------------------------------------------------

Problems

1. Using the mobile card built-in network classification:

① Network RTK. Base station put a mobile phone card, mobile station put a mobile phone card, through the flow of differential signal transmission, to obtain a fixed solution.

②cors Net. Apply for a cors account with local cors management, put a mobile phone card inside the mobile station, log in to the Cors account, get the differential signal, get the fixed solution.

2, reference station signal lights description

① Base station green light has been flashing,

Status: Not yet connected to the server, connecting,

If the server is not connected for a long time?

WORKAROUND: A. Replace the server ip\ port before attempting to connect

b. Check the phone card is not a fee?

② Reference station signal green constant, not flashing yellow light,

Status: Connected to the server, the base station has no differential signal!

Solution: Smooth acquisition of coordinates, set the base station emission signal!

③ Reference station beacon Green constant interval flashing yellow light,

Status: Connected to server, transmitting signal

3, Mobile Station lights description

① Mobile Station green light has been flashing,

Status: Not yet connected to the server, connecting,

Not connected to the server for a long time?

WORKAROUND: A. Replace the server ip\ port before attempting to connect

b. Check the phone card is not a fee?

② Mobile Station green light, not flashing yellow lights?

Status: Connected to the server, the differential signal is not received,

Workaround: A. Check that the server \ip\ port settings are the same as the base station?

B. Check that the base station is sending a signal?

③ Mobile Station green constant interval flashing yellow light

Connect to the server and are receiving signals

Corresponding states: Stationary solutions for mobile stations

4, the Datum station has sent the signal, the mobile station receives the signal, is not fixed?

Workaround:

① Check if the satellite is locked?

② Check if there is occlusion?

③ determine if it was bought before August 2015, need to upgrade the host to support RTCM3.2 format!

Please contact CSCL technology to assist in upgrading the motherboard to support rtcm3.2!

5. List of IP ports available in the CSCL server

Guangzhou 1 operator: cmnet

Ip:121.33.218.242,zhd Port:9000/8800/8000/7000

Ntrip Port 2101,

Guangzhou 2 (stability recommended) operator: cmnet

ip:202.96.185.34, Zhd Port:9000/8800/8000/7000

Ntrip Port 2101,

CSCL Beijing Operator: cmnet

ip:101.201.51.235, Carrier: Cmnet,zhd Port: 9000

Ntrip Port 2101,

CSCL Kunming Technology Network disk: http://zhdkm.ys168.com

CSCL Kunming Technology Blog: http://www.cnblogs.com/zhdkm

CSCL RTK is a mobile card using the instructions built-in network settings