Customized measurement management system for the TM-3000 laser measuring instrument

For customers to develop a set of Keane TM-3000 measuring instrument supporting management system, good feedback. If anyone needs a custom development, you can contact me, [email protected]

First introduce the Keyence company's TM-3000 laser measuring instrument, the official product homepage is: http://china.keyence.com/products/measure/micrometer/tm-3000/index.jsp
This system product uses the transmission principle, and the measuring range is large, the adjustment does not time, shortens the unit operation work hours. Very High measurement indicators:
1, at the same time can measure 16 points,
2, repeat accuracy: plus or minus 0.06 microns
3, measuring position accuracy, plus or minus 0.5 microns


Perhaps some people know that the master Keane has provided TM Navigator software, may think this software can do measurement management system, in fact, is not. The software is used only to make a measurement program. For example, we want a product of the length of the high, first through the TM Navigator software to make a measure of the length and width of this product program, in the measurement, it is necessary to upload the program to the measuring instrument controller, and then manually control the measurement instrument, and then manually recorded the measured values.


From this process, we can find that the measurement program can be completed by the TM Navigator, but the measurement process still requires a lot of manual operation, if your product is more, or the same product, model more, you need a management system, if your batch is large, these manual operation is very troublesome . This is also the most primitive requirements of TM plus measurement management system.


In the development of this software system, referring to the product PDF manuals and programming API manuals provided by Keyence company, it must be said that Japanese companies are doing a really extreme thing, the hardware does not say, the document is very good, the relevant chapters of the PDF document can jump, it is very helpful to understand the product.


The capabilities of the TM plus measurement management system developed include:
1, can automatically call the TM-3000 measurement program according to the product model
2, Product parts serial number can be automatically generated or barcode scanning input
3, support rework and re-test the product parts
4, the size of the automatic alarm warning (beep/interface highlighting)
5, can generate batch measurement report (PDF format or paper printing)
6, perfect privilege control and log function

Below is the main interface, the following link is the management system of the introduction of documents, you can freely diffuse http://pan.baidu.com/s/1sjym4lZ

If anyone needs a custom development, you can contact me, [email protected]

Customized measurement management system for the TM-3000 laser measuring instrument