D-link Broadband Router Settings

With the development of China's routing industry, also increased the market demand for broadband routers, while broadband routing has become the main force in the routing industry, the following we explain the specific steps and methods of broadband router settings. This article takes the di-740p model of broadband router D-link, the default management address is 192.168.0.1, and the management port is 8080.





set the IP address and router management address of a computer on the same network segment, such as 192.168.0.2, open the 192.168.0.2 computer's browser, and enter "http://192.168.0.1:8080" in the Address bar Press ENTER after the user Login prompt window, input broadband router instructions in the default management account and password into the broadband router settings interface. In order for the router to dial automatically, we also need to integrate the ADSL account into the router. Click on the top of the "Home" tab, and then click on the Change "WAN", in pppoverethernet to see the setting of ADSL account, enter their own application for ADSL account and password save settings.





now to the System Status tab in the "System Information" to see the status of the network, at the WAN end can be clearly seen ADSL dial-up access to information. After setting up the ADSL account, we can access the Internet through the broadband router, but in order to better manage and improve security, we need to do the following: Click "Home" tab, then select "DHCP" on the left, and set the IP address range at the IP range where the DHCP server can enter, After saving, the broadband router has the function of automatically assigning IP address. Default settings All computers connected to the router are protected, that is, in the intranet, the use of Peer-to-peer software such as BT will be affected. We can set the declared host by using the "DMZ" in the "Advanced Settings" tab. The host set up here is exposed to the network, on the one hand can use BT download software and build
without any concern




access to the Filter tab in the Broadband router Setup interface, we can filter the source and address of the datagram, including IP address, URL information, MAC address and regional information. Set "Activate" IP address filtering, and then enter the IP address within the IP address range, such as 192.168.0.111. "Port range" is actually filling out the information, because the BT download using 6881 to 6889 ports, so we can filter here. "Protocol" selects TCP, and "scheduling" sets the time for the filter to take effect (the time is forbidden to see the actual situation).





Two
of service and security




computers exposed to the Internet, hackers and viruses can exploit vulnerabilities to attack computers, but we can set up virtual servers through broadband routers to solve this problem. Login to the broadband router Setup interface. Select the Virtual Server tab in the Advanced Broadband Router settings interface. To activate the virtual server settings, enter the relevant virtual server information. For example, we want to allow 192.168.0.112 this computer to provide FTP services, but also want to let other ports to be protected by the router, you can only virtual the FTP service.





tp-link Router Configuration guide





1, gather and judge the information, prepare for configuring the router;





2, enter the router management interface, configure the router;





3, configure the process of simple fault location removal!





1, prepare the router before





The first thing you need to be sure of is what is your "broadband access" approach? Of course, the easiest way to do this is to call your ISP (Internet service provider) for advice, or you can make a quick decision with the way you purchased your router's previous network connection. Common hardware connections are the following:





1, telephone line->adslmodem-> computer





2, twisted pair (Ethernet cable)-> Computer





3, Cable TV (coaxial cable)->cablemodem-> computer





4, Optical fiber-> Photoelectric Converter-> proxy server->pc





Adsl/vdslpppoe: A computer running a third-party dial-up software such as a Enternet300 or WinXP system with its own dialer, fill in the account and password provided by the ISP, dial before each time you go online, or your adslmodem has routing enabled, Fill in the account and password provided by the ISP, dialing the action to the modem to do; (this kind of broadband access is typically the "network Express" provided by Southern Telecom), the above mentioned connection authentication method is only a relatively high rate of some broadband access mode, Of course there are other topological connections and authentication methods exist; So when you are not sure of your broadband approach, it is best to ask the ISP: their installed broadband access, IP address is static or dynamic? Is the protocol used for authentication PPPoE, 802.1X or Web authenticated? When the above two problems have the answer, you can configure the router;





2, how do I get into the router management interface?





will Adslmodem, routers, computers link up; management address of TL-R4XX series routers factory default: IP address: 192.168.1.1, subnet mask: 255.255.255.0 (tl-r400 and tl-r400+ The administrative address of section two defaults to: 192.168.123.254, subnet mask: 255.255.255.0 the router LAN port and the computer network card connection is good, because the Ethernet port on the router has the Polarity automatic reversal function, therefore regardless of your network cable uses the straight line or the cross lines all may, needs to guarantee is the network cable crystal Head The production of solid and stable, crystal Head copper film does not rust and so on. Www.3lian.com





computer Desktop Right click on "My Network Neighborhood", select "Properties", in the pop-up window, double-click to open "Local connection", click "Properties" in the pop-up window, then look for Internet Protocol (TCP/IP), and double-click the Internet Protocol (TCP/IP) property window, select "Use the following IP address" in this window, and then fill in the corresponding location: IP address: 192.168.1.X (X range 2-254), subnet mask: 255.255.255.0, default gateway: 192.168.1.1, after filling out "OK" two times;





3, check that computers and routers can communicate?





can use the following methods to view, open the computer's DOS interface: "Start"-> "program", click "MS-DOS" (Win98 operating System) "Start"-> "program"-"Accessories", click "Command Prompt" (win2000/xp operating system)