Daily maintenance of Computer optical drive

Maintenance Aspects 1

Each use of optical drive, the disc will inevitably strip into some dust, dust if falling to the laser emitter, will cause the optical drive to read the data difficult, affecting the quality and life of the laser head reading disk, but also affect the optical drive internal mechanical components of precision, so indoor must be kept clean, reduce dust. Cleaning the mechanical parts inside the optical drive can generally be used to wipe the machine, the laser head can not be used alcohol or other cleaning agent to wipe, if it must be clean, you may use the airbag to the laser head blown off the dust, the operation must be careful, a little attention may cause damage to the laser head. Shockproof, dustproof, moisture, heat, in fact, any one of the computer accessories should pay attention to these.

　　Maintenance Aspects 2

Although some pirated optical discs (especially VCD disk) can also play normally, but because of poor quality, disk glazing Lane deviation, optical disk drive read frequently error correction, so that the laser head control components are prone to aging, will accelerate the internal optical drive mechanical wear, if the use of pirated discs for a long time, not only the optical drive error correction ability greatly reduced, affecting normal It also reduces the life of the optical drive.

　　Maintenance Aspects 3

We use the computer for entertainment listening to CD music, watching VCD and playing games, will inevitably cause the CD-ROM drive wear, continuous playback VCD A few hours later, optical drive fatigue greatly increased, continue to seriously affect the optical drive life, you can use the virtual CD-ROM, VCD and computer games virtual to the hard disk, This will not only speed up the access speed, but also extend the life of the optical drive.

　　Maintenance Aspects 4

We have a lot of bad habits in the use of optical drive, such as the use of hand to close the door, the disc when the high-speed rotation of the disc to eject the door, shut down or restart the computer without removing the disc, etc. are bad habits, directly affect the life of the optical drive. The CD-ROM should be taken out when not in use, because as long as the computer is on, the optical drive is working even without the CD.

　　Maintenance aspects 5.

Do not keep the disc in the CD-ROM drive, because the CD-ROM drive every once in a while to detect, especially the recorder, always in the constant detection of optical drives, and high-speed CD-ROM (especially CD-ROM 52X, turn fast) in the work, the motor and control components will produce a high heat, on the one hand will make the machine temperature On the other hand, it also accelerates the wear of mechanical components and the aging of laser heads.

　Maintenance aspects 6.

Not the disc on the inside, they are not DVD player, in fact, the computer drive error correction ability far less than the DVD player, to see the film than buy DVD player.

　　Maintenance aspects 7.

Do not use the drive for a long time (mainly to see movies), it is recommended to copy the video to the hard disk, so it looks smooth, in addition to the virtual CD-ROM can also be used to make virtual discs.

　　Maintenance aspects 8.

Hard drive, optical drive master jumper to correct. When connecting the IDE device, follow the principle of red and red, so that the power cord and the data line red edge line, so that the plug instead of burn hardware. There are usually anti-slip ports on the IDE's line, which are generally not reversed.