Dellpoweredger210: Enter BIOS to modify the disk Controller Interface Mode

Dellpoweredger210: Enter BIOS to modify the disk Controller Interface Mode

Modify the disk Controller (SATA Controller) interface mode in the BIOS of Dell poweredge r210

Press F2 to enter BIOS settings, for example:

BIOS Settings Main Interface:

Move the cursor to "SATA Controller" using the up/down key and press the Enter key to enter Interface Mode settings.

Move the cursor to the "SATA Controller" with the up/down key and use the left/right key to modify the interface Mode, including options: Off, ATA Mode, AHCI Mode, and RAID Mode. <Strong? Http: www.bkjia.com kf ware vc "target =" _ blank "class =" keylink "> Drawing/bP1r6vuOajujxiciAvPg0KPGltZyBhbHQ9 "here write picture description" src = "http://www.bkjia.com/uploads/allimg/150721/04050U119-3.png" title = "\"/>

After setting, Press Esc to save and exit.

Note: When you restart and load the configuration item after exiting, the user will be prompted to confirm whether to modify it. In this case, you need to press the Y key twice in a row, for example:

Press F11 to go to the boot device list. You can select which disk or device to start from.

With Boot SEquence, you can set the startup SEquence:

The system is installed on SATA2, but the BIOS information is lost. By default, an error occurs when the system is started from SATA1: