Deploy PMTA Environment starting POWERMTA: [FAILED] Problem Solving method

Have been heard rumors to play Mass (EDM) project webmaster are very powerful, just a few days ago met a netizen in the net to download a cracked version of the Pmta+oempro combination program and then learn to install the time encountered a few problems, so the program to a come over the installation to try, According to the friend mentioned the problem at the beginning of the deployment of PMTA, the installation will not start, and the original default should be opened 7100 ports are not open.

Because I have not installed the program, so through a rich Internet search solution, for us to install PMTA after the installation of the 7100 port does not automatically start (of course, the direct input of IP and port can not open the Web interface), as well as in the boot Pmta (/ETC/INIT.D/PMTA Start), "Starting Powermta: [FAILED]" error prompts appear.

1, check the port

We are entering "NETSTAT-LNPT" to check which ports are open.

According to the tutorial we should see there are 7100 ports, not seen here, it needs to be resolved.

2, check Pmtad error and solve

The code is as follows	Copy Code
Pmtad--debug

Enter a command to see what went wrong.

Here you can see 435 rows of errors.

The code is as follows	Copy Code
VI +435/etc/pmta/config

Position directly to 435 lines and modify the configuration.

I'll change "Smtp-source-host yourip yourdomain" to "Smtp-source-host 74.207.245.213 mail.laozuo.org".

We just need to change the corresponding IP address and domain name to our own. And then we're going to do "Pmtad--debug".

3. Check port and Web side

After the above, we then execute "/etc/init.d/pmta start" to check whether the port is effective NETSTAT-LNPT

Here you can see that there are 7100 and 2525 ports available based on the online installation tutorials.

Through our current server ip:7100, you can open the above page, which means Pmta installed, we can continue to deploy Oempro environment settings.

Summary, because the old left is not familiar with the operation of this project, in this article on the record Pmta in the installation process can not start the 7100 port problem, for the PMTA+OEMPRO environment of other deployments temporarily do not record.