Describes how to set the IP address of a LAN router.

A friend asked a question: how to set up the IP address of a LAN router to build a LAN for four machines in the office. In the following illustration, we should be able to solve the problem for him. Many families and companies need to use LAN router IP settings.

If you have five machines to access the Internet, you need an eight-port router. The networking method is as follows: device:
◆ One eight-port router, eight of which are LAN and LAN) ports and one WAN) Port, price: Yuan
◆ Network cable N meters, you will see it yourself :), there are N crystal heads
◆ Each machine must have a NIC

Creation method:
◆ Create a network cable: make 5 network cables based on your actual distance. Note: a single network cable cannot exceed 100 meters
◆ Connect five network cables to the NIC interfaces of five computers respectively
◆ Set the IP addresses and subnet masks of the five computers respectively. If you want to access the Internet, you must set the gateway and DNS information of the five computers to ensure that the computer names of the five computers are different, and the Working Groups are the same:

The names of the five computers are respectively A, B, C, D, and E. The working groups are all workgroups, the IP addresses are respectively set to 192.168.1.2 ---- 192.168.1.6, And the subnet mask is the same, all of which are 255.255.255.0. Assume that the IP address of the LAN router is 192.168.1.1, and the default gateway of the five computers is 192.168.1.1.

If you still need to share Internet access after the LAN is established, perform the following steps:
◆ DNS is set based on the Local DNS address, which can be found after the vro is connected to the network.
◆ Connect the ADSL cat to the WAN port of the router and set the WAN parameters in the router to ensure successful connection.
◆ After the above settings, an office LAN that can share Internet access is built. Ask me again if you have any questions.

IP address bandwidth limit of the dormitory LAN router:

Let's take a look at what we share with our favorite people. Our dormitory is Netcom, with 6 people in the dormitory, 3 people often play games DNF, and 3 people surfing the Internet, video viewers can ignore it. How can I limit the bandwidth allocated to these six individuals? I usually feel like I am on the Internet and I am not on the DNF card. 380 ~ Kbps. This way, the network speed is close to 45KB/S, and does not affect their normal Internet access or their downloading.

If the IP address of the LAN router is connected to two computers, will there be a thunder download card? For details, refer to). The thunder upload speed is generally 10-30 K. Don't talk about the speed limit, the speed limiting bird on Thunder is not used. If the card is not card, it has something to do with your bandwidth. I have a 4 m line. If I just drive thunder to watch movies, it is generally not card, however, if you need to download N tasks at the same time, it will surely get stuck, and the download speed can be limited. The average bandwidth speed per M should be limited to K, however, if the other one wants to watch movies online, it is best to set the speed limit to 60 K.