Describes how to set up a TP-Link wireless router.

There is a lot of demand for TP-Link in the routing market. Here we mainly explain the specific methods and steps for setting TP-Link wireless routers. Now, more and more users share Internet access and use their own wireless routes to access the Internet. Wireless routes are cheaper, and wireless and wired routes can be used at the same time, here we will talk about the settings of TP-Link Wireless routing in use. Generally, the network environment used by routers can be directly connected to Ethernet broadband or access to Ethernet broadband through other routers or servers in the LAN.

1. Single-Stage wireless route settings: (access Ethernet bandwidth directly through this router)

This method is very simple. You only need to read the manual and know how your broadband can be accessed. There are generally three types: Virtual dialing, automatic IP allocation, and fixed IP (static ), then, follow the instructions in the instruction documents to go through the following steps:

1. Connect the LAN port of the route to the computer Nic, and set the IP address and route in the same CIDR block on the wireless router on the NIC;
2. Open a browser, enter the IP address of the router in the address bar, for example, 192.168.1.1, and open the wireless router settings page (enter the default password, for example, admin and admin );
3. Set network parameters: (using virtual dialing as an example)

① Internet access method: ADSL virtual dialing (PPPoE ).
② Fill in the information box: ADS account, password: the login password provided by the carrier.
③ Wireless parameter settings: you can set a password or switch.
④ The gateway of the lower-level wired online computer Nic is set as the IP address of the router (Note: it is not the IP address of the WAN port !) For example, 192.168.1.1, DNS: the DNS address of the Telecom server.
⑤ All LAN ports and wireless networks can be used for Internet access. If you use the other two methods to access the Internet, you need to set the WAN port information of the wireless router.

Ii. Multi-Level routing cascade settings: wireless Internet access through the LAN)

Go to the wireless router settings page, as shown in the preceding figure. Set network parameters:

① Internet access: Ethernet broadband fixed IP (static ). If you use a server, you can select whether to automatically assign an IP address based on the configuration of the wireless router of the server.
② Fill in the information box: IP Address: can be selected at will. (If the server is used and the server has allocation rules, follow the rules.) For example: 192.168.1.2, submask: 255.255.255.0, Gateway: the IP address of the upper-level router (the internal IP address of the server), such as 192.168.1.254, and DNS server: the DNS address of the Telecom server, such as 202.102.197.122 (different data centers in different regions ).
③ The Gateway of the lower-level computer Nic is set as the IP address of the router (Note: it is not the IP address of the WAN port !) For example, 192.168.1.1; DNS: the DNS address of the Telecom server.
④ Set the wireless router of the wireless parameter.
⑤ All LAN ports and wireless networks can be used for Internet access.