Describes Tenda router cracking Techniques

I would like to introduce to you how to crack tengda vro. Many people may not know how to study the system of tengda vro cracking. It does not matter. After reading this article, you will certainly have a lot of GAINS, I hope this article will teach you more things.

Describes Tenda router cracking Techniques

Connect a vro: first, connect the WAN port of the router to the LAN of the MODEM. If the network cable arrives at home, directly connect the network cable to the WAN port of the router; then the computer Nic is connected to any LAN port of the router.

Configure the IP address of the computer: The following describes how to automatically obtain the IP address and manually specify the IP address. Take the WinXP system as an example. If your computer is installed with Windows95/98, refer to Appendix 1 "TCP/IP Settings in Windows95/98 environment" in the manual. First, we will introduce how to set the automatically obtained IP address. Right-click "Network Neighbor" on the desktop and select "attribute"

On the "local connection" page, right-click the tengda vro cracking interface and choose "properties" to open the TCP/IP protocol attributes, select "automatically obtain IP addresses and automatically obtain DNS server addresses, and click" OK ", run "start"-"run" on the computer, enter "cmd", and then click "OK". In the Command Prompt window, enter the "ipconfig/all" command. If an IP address is displayed, indicates that the NIC has obtained the IP address from the vro.

If the NIC cannot obtain the IP address or the IP address is 169.254.X.X, manually specify the IP address by right-clicking "Network Neighbor" on the desktop and selecting "attribute ". Right-click "Local Connection" and select "properties" to enable the TCP/IP protocol. The default LAN port IP address of the router is 192.168.0.1. Therefore, the gateway must be set to 192.168.0.1 and the IP address can be modified, range: 2 ~ 254 If multiple computers share the Internet, the IP addresses manually specified by each computer must be set to different. Otherwise, a conflict may occur in a LAN.

Tengda router cracking note: the preferred and backup DNS server addresses are the DNS server addresses of Shenzhen Telecom. If you are not a user of Shenzhen Telecom, please consult your network service provider for the DNS server address, enter the corresponding dialog box or enter the IP address and DNS server address in the WAN port of the router, and then enter the obtained DNS address in the computer.

Configure the router: Open IE and enter [url = http: // 192.168.0.1/] [color = #333333] http in the address bar: // 192.168.0.1/[/color] [/url] The vro management interface dialog box is displayed. The default username and password are admin. Click "OK" to go to The vro Management page and click "Next. Select "ADSL virtual dialing PPPoE)", add the user name and password provided by the network supplier for you, and click Next and save.

Select "ADSL virtual dial PPPoE" for tengda router cracking )". Add the online account and password provided by the network supplier for you, click Next and save. If the Internet account is: [email = szfcq179@163.g] [color = #333333] szfcq179@163.gd [/color] [/email] The Internet password is: 27657286 tenda. Click Next to save. The vro will automatically dial up. When the running status gets the ISP's TCP/IP parameter, the Internet can be accessed normally!