Desktop computer Bluetooth how to use? Desktop computer how to install Bluetooth

Desktop computer How to install Bluetooth, desktop computer Bluetooth how to use?

The desktop has no built-in Bluetooth module, so you need to manually match a Bluetooth adapter and install the driver software (the Bluetooth adapter comes with a drive disc).

Select a Bluetooth headset, the search device can be successfully paired after the use of the because Bluetooth is a wireless data transmission technology, limited by the distance is more obvious, theoretically distance the farther the signal will decay faster, so the Bluetooth headset to listen to music can not expect to have how good quality, of course, high-quality bluetooth headset sound is still possible, But the price is expensive, if not enthusiasts to buy a different point on the good, as for the price, the current market on Bluetooth equipment brand is uneven, the price is different, or more understand the next move for good! Bluetooth devices can be paired with each other, if the computer and mobile phone Bluetooth connection, to see whether the phone model to support Bluetooth and function of the set.

Let's look at the stand-type computer how to install Bluetooth and desktop computer Bluetooth how to use the method:

First: Data cable connected to the computer's USB port, the computer will be prompted with new hardware (Windows XP system is recommended, which will simplify your installation process), insert the CD that comes with the data cable into the optical drive, and allow the system to automatically find the driver (such as the driver file in the Data line drive disc needs to be installed, Please install the driver file first, the general system after a period of time can find the driver, and prompts you to install it until the installation is complete. If you are prompted to "new hardware has been installed successfully, you can now use it" and in the hardware manager-"port" you can see a virtual USB port number, indicating that the hardware has been installed successfully, and can be a general operation.

Second: After the successful installation of hardware, the next is to install a GPRS modem (this may be installed in the driver's time has been installed GPRS modem, different mobile phone GPRS modem installation may have a difference), in the "Hardware Manager"-"Modem" If you do not see a mobile phone corresponding to the GPRS modem, you need to manually install (in the installation of GPRS modem, you may need to install the GPRS modem driver), installation methods, please read the data line or phone instructions.

Third: GPRS modem installation Success, has been done, and then you need to create a dial-up link in the computer (this process can be done under the System wizard, step-by-step), you need to fill out the "Dial: *99#, username and password for the empty on it."

Four: Set the way of dial-up connection, if not this step, then the cost you can not afford to (0.1/kb,100 Yuan does not have much flow to consume), in the "Hardware Manager"-"Modem" to find the mobile phone GPRS modem, in the GPRS modem "attribute"-"advanced, The additional initialization command "fills in [At+cgdcont=1," IP "," Cmwap] (Note: the command in parentheses) is OK.

Five: The above steps are OK, now you can dial, try, it should be.

Sixth: Dial-up success, indicating the connection rate is 115kbps, this surface dial-up connection has been successful, but the actual rate of not 115kbps in about 64kbps. Now open IE can not be on the WWW site, you need to set up the agent, the setup process is as follows:

In IE "Internet Options"-"connection" to find the dial-up connection you created, click "Settings" in the "Proxy server" set "Address: 10.0.0.172 Port: 80" click OK.