Detailed description of router wireless network settings in jinke NW605 +

When configuring the wireless network of the branch NW605 + wireless router, it is somewhat different from the commonly used home wireless router. Next, I will explain some parameters in the wireless configuration.
First, log on to the branch router, connect to the vro using a wired or wireless connection, click Wireless Configuration-basic configuration, and then pay attention to the following aspects:

I. The frequency band is set based on the laptop Nic. If your Nic is in 802.11b mode, select 802.11b as the frequency band. If it is 802.11 GB, select 802.11 GB. If both are available, select the default 802.11b/g.
Ii. Enhanced Mode the enhanced mode is a special acceleration function designed by yunke. After selection, the wireless network speed will be greatly improved.
3. The default SSIDSSID is NETCORE. Generally speaking, this is the name of the wireless network, that is, the name of your wireless network that appears when you view the wireless network in your notebook. You can set it by yourself.
4. Broadcast SSID: As the name implies, the SSID of the vrossid is broadcasted in the network. This is enabled by default for you to connect to the wireless network. If disabled, the vrossid's SSID cannot be found, you must manually enter the wireless network connection option in the notebook to connect. Www.2cto.com
5. different regions and different channels are available. The default value is Asia. Available regions include Asia, North America, and Europe.
6. Channel channels are the frequency segment for wireless networks. Currently, wireless networks are widely used and are basically within the coverage of several wireless networks, when these wireless networks use the same or similar channels, interference will occur, reducing the wireless transmission speed. In this case, you can enable ABS to automatically switch to the optimal channel, or manually set it.
After setting, click the application and set the basic configuration of the wireless network. If you need it, try setting it. This article is from