[TECH: Video]
Content 2004 by lyberty; last updated March 30,200 5
S-video(Separated-video) is
Better than a composite video connection.
But note that the bandwidth of S-video (also written as "s video") is the same as that of composite video. the real benefit of an S-video connection is that it can reduce dot crawl, hanging dots, and crawler edges that appear on the vertical
And horizontal edges (respectively) of some colored objects in the picture. [more]
S video, originally known as "Y/CSEparated video ", is one of the higher quality ways to transmit the television signal from a peripheral device (DVD player, PlayStation 2, whatever) to a television. The way s-video
Works is that it basicallySeparates the color information (chrominance) from the brightness (Luminance). By doing this, it usually CES things like color bleeding and dot crawl and greatly increases the General clarity and sharpness of the picture.
Reason That this is so is that televisions are designed to display separate
Luminance (y)AndChrominance (c)Signals.
S-video connector pin-out:
Recommendation: The increase in picture quality that you'll get in platform games (like the PS2) when you move from composite (yellow-plug) to s-video is very noticeable and is well worth spending
The extra money to buy the optional cable.
Component(Not composite) video [aka Analog Component Video; y-Pb-PR; red-green-blue]:
Uses a three Jack cluster of wires with the ends color coded green, blue, and Red. (does not include audio cable ).
Y-Pb-PR, or what we nowadays refer to as Component Video or color difference video, was receivted to simplify Video Electronics and reduce the overall bandwidth requirements for transmitting video compared with RGB. in practice it provides
One luminance signal with full horizontal resolution and two color signals with CED horizontal resolution.
Y = luminance, Pb = chrominance 1, Pr = chrominance 2
From your DVD player or HDTV Set Top box to your TV, it is analog, thus its full name "Analog Component Video ".
Also referred to as Y, R-Y, B-Y orColor Difference video. Some DVD players label the green, blue, and red jacks y, CB, Cr.
CompositeVideo [RCA or BNC] (aka "Yellow-plug" video)
The old "Av" Standard connector. The common RCA connector is color-coded yellow for composite video.
The term "Yellow-plug video" is recommended to help cut down on confusion between "composite" and "component" (which sound alike ).
Summary:
The four types of standard video connections described in the following table give you four levels of video quality. optimize your viewing experience by using the best connection available for your connected component. for example, if your DVD player supports
A component video connection, connect the DVD player to your plasma TV using Component Video instead of composite video or S-video.
| Quality |
Cable and connector |
Connection description |
| Best |
|
Component-The video signal is split into three signals, two color and one black and white, giving you the best picture. use Component Video to take advantage of the superior picture found in such signal sources as HDTV and progressive
DVD. |
| Better |
|
S-video-The video signal is split into two signals, giving you an even better quality picture. For example, text displayed on-screen using this connection is noticeably sharper than composite or coaxial (RF ). |
| Good |
|
Composite("Yellow plug")-the video signal is carried through a single "pin". This connection type is the one that is most commonly found on video devices (as of 2004/2005 ). |
| Basic |
|
Coaxial (RF)-The video and audio signals are both carried in one cable. Used for antenna and cable signals.
(The other three connection types only handle video, requiring separate connections for sound .) |
But what about those red and white connectors?
Audio inputs
Stereo andio audio connections use red and white color coded "RCA" connections. These support mono or Stereo analog audio.
Building a home theater:Get a 27 "or bigger TV with
ComponentVideo input.
The only feature you shocould shop for when buying this TV is
ComponentInput (in additionCompositeAndS-video). This input is about 1/2 an inch in diameter with about five pins in the center.
Component Video comes in different non-interchangeable formats (scan rate formats) for regular TV or HDTV, for example:
>>>>>>>>>>>>> Interlaced or 480i from a standard ntsc dvd player :: 480i = NTSC interlaced video = 640x480 pixels = 480 displayed horizontal lines of resolution
>>>>>>>>>>>> 480 P from a progressive scan ntsc dvd player :: 480 P = NTSC progressive scan = 640x480 pixels = 480 displayed horizontal lines of resolution
>>>>>>>>>>>> 720 p (HDTV): 720 displayed horizontal lines of resolution
>>>>>>>>>>>> 1080i (HDTV): 1080 displayed horizontal lines of resolution
Note: Typically, standard TVs and HDTVs support only a 60Hz refresh rate.
Component or S-video? (.)
S-Video: separates chrominance and luminance
Component: Further separates chrominance into two signals
This is why component is better. makes a big difference even on an analog TV when using a DVD player.
Recomendation: use high quality cables. Gold plated, double shielded, and made for video only.
NOTE: If your DVD player does not have a progressive scan (480 p) button then the signal will be 480i. |
