Detailed diagram of the PPPoE settings of the ROS soft route (1)

We have explained a lot about PPPoE settings, such as PPPoE settings in Windows and PPPoE settings in Linux. In the next few days, we will mainly explain how to set up the ROS soft route PPPoE.

ROS soft route PPPoE settings: Set the IP address pool

Go to winbox and click IP ingress Pool1 ｡

Figure 1

On the "IP Pool" page, click "+" at the bottom of the menu, as shown in figure 2 ｡

Figure 2

On the "New IP Pool" page, click "Addresses" to go down, as shown in 3 ｡

Figure 3

Enter the address pool range, as shown in 192.168.6.11-192.168.6.252, 4. Click OK to exit ｡