Detailed explanation of configurations of SOHO Broadband Router Access ISP

[Experiment Name] detailed explanation of configurations of SOHO Broadband Router Access ISP
[Purpose] To configure the access to ISP of the D-Link SOHO Broadband Router so that the administrator can configure the basic broadband access mode on the Web.
[Background description] on a certain day, a small company applied for an ADSL bandwidth. Now the company is boiling, and my colleagues are talking about it happily. It is convenient and fast to communicate with customers over the network. That means you can query the information of each merchant anytime and anywhere with the network. At this time, Dayong, the most talented network in the company, said a word to colleagues who are excited about the incident, lowering the temperature: "China Telecom provides only one network interface to the ADSL modem, who should I use?" Now, everyone is quietly thinking about the reasons for using the network. At this time, DaYong added: "Well, even if there is only one ADSL Broadband Network Interface, I also have a way to make all my colleagues who want to access the Internet access ." My colleagues have all opened their eyes and looked at everyone's eager eyes. They not only said slowly: "There are many ways for many people to share an ADSL Broadband Network, among them, the commonly used methods include using Windows OS ICS sharing, using proxy server software for sharing, and using Broadband Router shared broadband. Although the first two methods are relatively simple in operation, they have a single function and have certain limitations in use. My advice is to use a Broadband Router for shared bandwidth ." At this time, DaYong picked up a box from the side and said: "This is a D-Link Broadband Router DI-504 I bought from the electronic market, with it, we can all access the Internet ". The manager has long been responsible for this matter. Next, let's take a look at how Dayong installs and commissions a Broadband Router.
[Experiment topology] the network topology of Dayong company. We hope that all the computers can use a Broadband Router to share an ADSL line to access the Internet.
 
[Experimental device] One ADSL access line, one D-Link Broadband Router, two test PCs, and several network cables. [Tutorial] Step 1: connect to a Broadband Router. (Take DI-504 as an example)
First, connect the 9V AC power adapter that comes with the DI-504 to the rear panel of the DI-504; then insert the adapter into your power outlet. DI-504 front panel power LED light on, indicating the operation is correct.
 
Insert one end of an ethernet Cable to the WAN port on the rear of the DI-504 and the other end to the Ethernet port on your DSL/Cable modem.
The LED light on the WAN port on the DI-504 front panel shows that the operation is correct. If you are using ADSL Modem, connect the telephone line to the RJ-11 interface of ADSL Modem.
 
Insert one end of another Ethernet cable into the lanport on the back panel of the DI-504, and the other end into the computer NIC that you used to configure the DI-504. The LED light on the LAN port on the DI-504 front panel shows that the operation is correct.
Connect other computers to DI-504 Broadband Router:
With other ethernet cables, connect other computers with Ethernet interfaces that require access through the DI-504 Broadband Router to the remaining three lanports on the rear panel of the DI-504.
Step 2: Configure computer network settings. On the desktop of a computer in use, right-click the network neighbor and select "properties ".
 
In the subsequent window, right-click the local connection and select "properties ".
 
In the subsequent window, select the Internet Protocol (TCP/IP) and click "properties ". Select "automatically obtain IP Address", click OK, return to the previous interface, and click Close. When your computer is connected to the DI-504, the computer automatically gets the IP address.
 
After about 15 seconds, when the local connection shows that the connection is connected, click Start-run, Enter cmd in open, and click OK.
 
Enter the MS-DOS Command Prompt window, type ping 192.168.0.1 and press Enter.
 
If Reply from 192.168.0.1: bytes = 32 time & lt; 1 ms TTL = 64 appears, it indicates that the computer has been connected to the DI-504, you can perform the next step.
Step 3: configure a Broadband Router. Open a Web browser, type [url] http: // 192.168.0.1 [/url] in the address bar, and press Enter.
 
In the subsequent login window, enter the username: admin, set the password to blank, and click OK ".
 
In the window that opens, click "setting wizard ".
 
Select "Next ".
 
Set a new password.
 
This password is the password used to log on to the vro management interface. It is blank by default and can be modified or kept unchanged.
Select the time zone.
 
DI-504 Broadband Router Select Internet connection type
(1) PPPOE connection mode configuration
 
 
Enter the user name and password provided by the ISP, click next, and then click reactivate to complete the configuration of the DI-504 Broadband Router.
 
(2) fixed IP address connection mode configuration
 
Enter the static IP Address Provided by the ISP
 
Then reactivate
 
(3) Dynamic IP address connection mode configuration
 
Click Next.
 
Reactivate a vro
 
Step 4: view the connection status of the Broadband Router. The WAN port is connected.
 
DHCP Information Status
 
[Note] 1. By default, the DHCP server function of the Broadband Router is enabled. By default, the computer can set the IP address information to be automatically obtained to facilitate access networks. 2. If you do not use the Configuration Wizard to configure the vro, you can make the following selection. The configuration interface is the same as the previous one.
 
3. If you modify the IP address of the LAN interface of the Broadband Router, the IP address range provided by the DHCP server also changes accordingly.