Detailed installation of linux Remote Control-VNC

Source: Internet
Author: User

 

Network remote control technology refers to a computer (master) to control another computer (controlled), and when the master is on the control end, just as users sit in front of the controlled terminal, they can execute the controlled application and use the system resources of the controlled terminal.

 

"VNC Introduction 』

Network remote control technology refers to a computer (master) to control another computer (controlled), and when the master is on the control end, just as users sit in front of the controlled terminal, they can execute the controlled application and use the system resources of the controlled terminal.

VNC (Virtual Network Computing) is a set of software developed by the AT&T lab that can control remote computers. It adopts the GPL authorization terms and anyone can obtain the software for free. The VNC software consists of VNC server and VNC viewer. You must first install the VNC server on the controlled computer before you can control the controlled terminal on the control terminal.

(In windows, a set of well-known remote control software called pcAnywhere, is also released by Symantec.

VNC server and VNC viewer support multiple operating systems, such as Unix, Linux, Solaris, windows, and MacOS, therefore, you can install the VNC server and VNC viewer in different operating systems for control. If the current master computer does not have VNC viewer installed, you can control the control end through a general web browser.

The workflow for running the entire VNC is as follows:

(1) connect the VNC client to the VNC Server through a browser or VNC Viewer.

(2) The VNC Server sends a dialog window to the client, requiring that you enter the connection password and access the VNC Server display device.

(3) After the client enters the online password, the VNC Server verifies that the client has access permissions.

(4) If the client passes the VNC Server verification, the client requires the VNC Server to display the desktop environment.

(5) The VNC Server uses X Protocol to require X Server to assign control of the display to the VNC Server.

(6) The VNC Server will be sent to the client using the VNC communication protocol in the desktop environment of X Server in the future, and allow the client to control the desktop environment and input device of the VNC Server.

"Installation and Use of VNC 』

My operating environment: RH 3 on the control side and Windows 2003 on the control side.

1. Load VNC Server

[Oracle @ jumper] $ wget http://www.realvnc.com/dist/vnc-4.0-x86_linux.tar.gz

-- 10:34:32 -- http://www.realvnc.com/dist/vnc-4.0-x86_linux.tar.gz

=> 'Vnc-4.0-x86_linux.tar.gz'

Resolving www.realvnc.com... done.

Connecting to www.realvnc.com [83.170.68.194]: 80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 1,625,390 [application/x-gzip]

100% [=============================>] 1,625,390 52.67 K/s ETA

10:35:04 (52.67 KB/s)-'vnc-4.0-x86_linux.tar.gz 'saved [1625390/1625390]

 

2. install.

Vnc-3.3.7-x86_linux.tar.gz (if the source code, see the instructions in the package), when downloading the Linux version of VNC, You can decompress the file to a folder, such as/home/vnc, copy the vncserver, vncpasswd, and Xvnc files to the/usr/bin directory. If you want to remotely control a Linux computer through the Integrated Java interface of the VNC server, you also need to create a sub-directory/usr/local/vnc/classes. After this subdirectory is created, copy the VNCJava. class file to this directory. (Generally, redhat 9.0 comes with the above files, so you can directly use the terminal to execute it ).

[Root @ xcorder] # tar-xvf vnc-4.0-x86_linux.tar

Vnc-4.0-x86_linux/

Vnc-4.0-x86_linux/vncinstall

Vnc-4.0-x86_linux/Xvnc

Vnc-4.0-x86_linux/vncviewer

Vnc-4.0-x86_linux/vncserver

.....

Vnc-4.0-x86_linux/java/vncviewer. jar

[Root @ xcorder] # cd vnc-4.0-x86_linux

 

[Root @ xcorder] #./vncinstall/usr/local/bin

Can't install manual pages to/usr/local/man/man1

Copying Xvnc to/usr/local/bin

Copying vncviewer to/usr/local/bin

Copying vncpasswd to/usr/local/bin

Copying vncconfig to/usr/local/bin

Copying vncserver to/usr/local/bin

Copying x0vncserver to/usr/local/bin

[Root @ xcorder] # mkdir-p/usr/local/vnc/classes

[Root @ xcorder] # cp java/*/usr/local/vnc/classes

 

3. Start VNC Server on Linux

Run the vncserver command:

[Root @ linux root] # vncserver

You will require a password to access your tops.

Password: ---- to prevent anyone from remotely controlling the computer. Therefore, when

Verify: --- when you start the VNC server once, you must set a password for remote control.

New 'X' desktop is linux: 1 ---- remember this line will be used later.

Creating default startup script/root/. vnc/xstartup

Starting applications specified in/root/. vnc/xstartup

Log file is/root/. vnc/linux: 1.log

(After the preceding steps, the VNC Server is started. If you want to change the VNC Server password, you only need to execute the vncpasswd command .)

 

4. remote control from the browser.

Start the VNC Server and open your browser. in the address bar, enter the address or IP address of the controlled terminal, and add the port number ": 5800 + display number" to the address to control the computer.

For example: http: // 192.168.01.: 5801 (if the display number is 1, the display number set for the first time is 1, then 5800 + 1 = 5801 is used .)

If you see the window, it indicates that you have succeeded. You can remotely control it by entering the password in the password box.

5. FAQ

A. How can I check whether the port is enabled properly?

[Root @ xcorder] # netstat-an | grep 01

Tcp 0 0 0.0.0.0: 5801 0.0.0.0: * LISTEN

Tcp 0 0 0.0.0.0: 5901 0.0.0.0: * LISTEN

Tcp 0 0 0.0.0.0: 6001 0.0.0.0: * LISTEN

.....

B. Why is there only one Terminal window on the desktop after the connection?

Try to modify/root/. vnc/xstartup and change the last line of twm & to gnome-session & or kde & (it is said that KDE is not stable in the current VNC Viewer)

C. Why can't I connect after I restart the VNC Server?

When you restart the VNC Server, the system will specify a new display number. You must use this new number. Otherwise, the connection will fail.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.