Detailed steps for Catalyst 1900 Switch configuration

The detailed steps for the configuration of the Catalyst 1900 switch and the steps for the configuration of the Catalyst 1900 switch are always ongoing. Today, we will introduce the basic status, password settings, and IP address settings of the vswitch. For configuration settings of the Catalyst 1900 switch, please refer to the relevant documentation.

After the physical connection is complete, we need to turn on the computer and the Catalyst 1900 Switch configuration. Next we will describe this configuration process with a Cisco netmanager switch "Catalyst 1900. Before entering the configuration, we also need to enter the system. The configuration steps of the Catalyst 1900 switch are as follows:

Power on the computer that is connected to the Catalyst 1900 Switch configuration and runs one of Windows 95, Windows 98, or Windows 2000 on the computer. Check whether the "Super Terminal" Hyper Terminal) component is installed. If the component is not found in the "attachment" Accessories), you can Add the Windows component by adding/deleting programs Add/Remove Program.

Okay. After the "Super Terminal" is installed, we can communicate with the Catalyst 1900 Switch configuration. Of course, we need to connect and turn on the switch power ), the following steps are complete. Before using a Super Terminal to establish a communication with a vswitch, you must first set the Super Terminal.

All default configurations before the Catalyst 1900 Switch configuration are as follows: all ports have no port names; all ports have Normal priority and all 10/100 Mbps Ethernet ports are set to Auto, all 10/100 Mbps Ethernet ports are set to half duplex mode and no virtual subnet is configured. The steps for formal configuration are as follows ):

Click "start" and click "Super Terminal" in the "attachment" option of the "program" menu. Page 4 is displayed. Double-click the "Hypertrm" icon. the dialog box 5 is displayed. This dialog box is used to oppose a new super terminal connection item.

In the "name" text box, type the name of the level-level terminal connection item to be created. This is mainly for easy identification and there are no special requirements. Here we enter "Cisco ", if you want to select an icon that you like for this connection item, you can also select one in the icon bar and click "OK" to bring up the dialog box 6.

In the "connect to" drop-down list box, select the serial port of the computer connected to the Catalyst 1900 Switch configuration. Click OK. The dialog box is displayed. Select "9600" in the "baud rate" drop-down list box, because this is the maximum communication rate of the serial port, all other options use the default value. Click OK. If the communication is normal, the main configuration interface similar to the following is displayed, and the configuration of the Catalyst 1900 switch is displayed in this window.
Catalyst 1900 Management Console
Copyright c) Cisco Systems, Inc. 1993-1999
All rights reserved.
Standard Edition Software
Ethernet address: 00-E0-1E-7E-B4-40
PCA Number: 73-2239-01
PCA Serial Number: SAD01200001
Model Number: WS-C1924-A
System Serial Number: FAA01200001
User Interface Menu
[M] Menus // main configuration menu
[I] IP Configuration // IP address and other configurations
[P] Console Password // control Password configuration
Enter Selection: // Enter a shortcut letter for the item to be selected, and press Enter to confirm
Note: The content following "//" is the author's explanation of the preceding statement, the same below.

Now, the configuration interface of the Catalyst 1900 switch is officially entered. The following work will be able to officially configure the Catalyst 1900 switch.