Detailed steps for configuring wireless route entries

Next, let's take a full look at the detailed steps of wireless route settings. Because I am familiar with network devices and often buy device inquiries for my friends, there is nothing to do with it, but sometimes we encounter "100,000. Why?" If you don't know anything, it's terrible. Now, all the calls are billed in one way, and the technical hotline fee is not counted. The on-site service is so painful! On Sunday, I made a free volunteer.

Last week, I helped my friend buy A D-link DI-624 + A wireless router, he "shared" A broadband from the landlord to access the Internet, this year "sharing" is not an obligation, the market price is 50 RMB a month. After the cable was pulled, I got two desktops and a notebook on the wireless router. I used it well on Saturday, but I suddenly couldn't access the Internet on Sunday. The technical hotline does not work either. It can only be used as a running leg. Generally, cainiao have several questions about wireless route settings:

◆ How to set wireless routing: In the Installation Wizard, do I select Dynamic IP addresses or fixed IP addresses? Because it is used to pull the landlord line, you need to set it as a fixed IP address here.

◆ How to configure wireless routing: for example, if you select a dynamic IP address, which is the MAC address of the local connection or the MAC address of the wireless connection? Select a dynamic IP address. This option is selected only when cable broadband is used.

◆ How to configure wireless routing: for example, how to set a fixed IP address, wan ip address, WAN subnet mask, WAN gateway, primary DNS address, and secondary DNS address?

◆ How to configure wireless routing: Do I need to change the IP address and DNS address of my computer? Or is DHCP assigned by default?

 

Wireless route settings page navigation

You can set the IP addresses of each computer in the vro, or set the IP addresses in the computer, depending on the vro settings. Don't worry. Next we will discuss how to set up wireless routes! Generally, we can use two methods to access the Internet.

◆ Wired mode:

Connect the landlord's line to any LAN port rather than the WAN port), and then connect other computers to another LAN port using a network cable. In fact, such a sharing method can be implemented directly using a vswitch. As long as the landlord dials a number, the Internet can be accessed as usual.

The computer settings are based on the router settings of the landlord's house. For example, the router of the landlord's house is set to 192.168.1.1. The IP addresses of your two computers are set to 192.168.1.X, gateways: 192.168.1.1, and DNS: 192.168.1.1 ). Then you can proceed. This approach is equivalent to using a Broadband Router as a switch. The principle is simple and easy to implement.

 

Set Static Routing for wireless Routing

◆ Wireless mode:

In this case, the WAN port is used because the data is forwarded. First, confirm the router settings of the landlord's house. You need to know the IP address, subnet mask, and DNS. DNS is the DNS in the WAN settings. For example, the IP address of the router in the landlord's house is 192.168.1.1, subnet: 255.255.255.0, and DNS: 1.1.1.1. connect the connection to the router of the landlord to the WAN port of the wireless router. Set the WAN to IP: 192.168.1.X, subnet 255.255.255.0, Gateway: 192.168.1.1, and DNS: 1.1.1.1.

 

Set IP addresses for wireless Routing

Then, set the LAN to: IP: 192.168.0.1 subnet: 255.255.255.0 DNS: 1.1.1.1 WAN port and LAN port IP address are not in the same network segment ). The computer connects to the LAN port and is set to 192.168.0.X subnet: 255.255.255.0 Gateway: 192.168.0.1 DNS: 192.168.0.1 and 1.1.1.1. The IP address after the transfer of 192.168.0.1 is 1.1.1.1, so both DNS servers can. Remember to encrypt it when using wireless! Otherwise, it will be free for neighbors! Okay, everything is OK, wireless and wired.

 

Security Solution for wireless route settings