DHCP Relay Ethernet Link Aggregation

650) this.width=650; "style=" width:800px;height:388px; "title=" qq20160512001747.png "border=" 0 "hspace=" 0 "alt=" Wkiom1czw4gqtt1oaan4akpkuw0209.png "src=" http://s2.51cto.com/wyfs02/M01/7F/FD/ Wkiom1czw4gqtt1oaan4akpkuw0209.png "width=" "height=" 388 "/>

sw2========================================================================================

[Sw2]dis CU

#

sysname SW2

VLAN batch------ adding VLANs

#

Interface Eth-trunk1 Link Aggregation

Port Link-type Trunk set interface to trunk mode allows VLAN 10 20 through

Port Trunk Allow-pass VLAN 10 20

#

Interface Eth-trunk2

Port Link-type Trunk

Port Trunk Allow-pass VLAN 10 20

#

Interface ETHERNET0/0/1

Port Link-type Access joins the interface in Access mode to VLAN ten

Port Default VLAN 10

#

Interface ETHERNET0/0/10

Eth-trunk 1 Interface added to Eth-trunk 1

#

Interface ETHERNET0/0/11

Eth-trunk 1

#

Interface ETHERNET0/0/12

Port Link-type Access joins the interface in Access mode to VLAN

Port default VLAN 20

#

Interface GIGABITETHERNET0/0/1

Eth-trunk 2 interface added to Eth-trunk 2

#

Interface GIGABITETHERNET0/0/2

Eth-trunk 2

#

sw3========================================================================================

sysname 

#

VLAN Batch 10 20

#

#

Interface Eth-trunk1 Inlet Interface

Port Link-type Trunk sets the interface to trunk

Port Trunk allow-pass VLAN Ten trunking allowed through Vlan10

#

Interface ETHERNET0/0/1

#

Interface ETHERNET0/0/2

Port Link-type Access joins the interface in Access mode to VLAN ten

Port Default VLAN 10

#

Interface ETHERNET0/0/12

Eth-trunk 1

# Add interface to Eth-trunk 1

Interface ETHERNET0/0/13

Eth-trunk 1

#

sw1=============================================================================================

sysname SW1

#

VLAN batch add VLAN

#

Cluster enable

NTDP Enable

NDP enable

#

Drop Illegal-mac Alarm

#

DHCP enable DHCP enabled

#

DiffServ domain Default

#

Drop-profile Default

#

IP Pool Vlan20

Gateway-list 192.168.20.1

Network 192.168.20.0 Mask 255.255.255.0 Set the address pool to Vlan20

Dns-list 2.2.2.2

#

Interface VLANIF1

#

Interface VLANIF10

IP address 192.168.10.1 255.255.255.0

DHCP Select interface sets DHCP Port-based for Vlan10

DHCP server Dns-list 1.1.1.1

#

Interface Vlanif20

IP address 192.168.20.1 255.255.255.0 set the gateway for Vlan20

DHCP Select global DHCP address pool selection globally

#

Interface VLANIF30

IP address 192.168.30.1 255.255.255.0 vlan30 setting up the gateway

DHCP Select Global

DHCP Select relay DHCP Relay Agent

DHCP relay SERVER-IP 23.0.0.3 point to proxy IP address

#

Interface Vlanif100

IP address 11.0.0.1 255.255.255.0 vlan100 setting up the gateway

#

Interface METH0/0/1

#

Interface Eth-trunk2 into the interface interface ETH-TRUNK2 and set it to trunk, allow VLAN 10 20 through

Port Link-type Trunk

Port Trunk Allow-pass VLAN 10 20

#

Interface Eth-trunk3

Port Link-type access into the interface interface Eth-trunk3 and set it to trunk, allowing VLAN 100 to pass

Port default VLAN 100

#

Interface GIGABITETHERNET0/0/1

Eth-trunk 2 Add interface to Eth-trunk 2

#

Interface GIGABITETHERNET0/0/2

Eth-trunk 2

#

Interface GIGABITETHERNET0/0/3

Port Link-type Access interface, set interface to access port belongs to Vlan30

Port default VLAN 30

#

Interface GIGABITETHERNET0/0/4

Eth-trunk 3

# Add the interface to Eth-trunk

Interface GIGABITETHERNET0/0/5

Eth-trunk 3

#

RIP 1 dynamic routing protocol

Undo summary Turn off Route rollup

Version 2 Release 2

Network 192.168.10.0

Network 192.168.20.0 tells neighbors that they know the IP

Network 192.168.30.0

Network 11.0.0.0

ar1========================================================================================

Interface Eth-trunk3 into Eth-trunk3

Undo Portswitch Switch from two-layer mode to layer three

IP address 11.0.0.2 255.255.255.0 set IP to Eth-trunk3

#

Interface gigabitethernet0/0/0

Eth-trunk 3 Add interface to Eth-trunk 3 (link aggregation)

#

Interface GIGABITETHERNET0/0/1

Eth-trunk 3

#

Interface GIGABITETHERNET0/0/2

IP address 12.0.0.1 255.255.255.0 set IP

#

Interface NULL0

#

RIP 1

Undo Summary

Version 2

Network 11.0.0.0

Network 12.0.0.0

ar2================================================================================================

Interface Eth-trunk4

Undo Portswitch Switch from two-layer mode to layer three

IP address 23.0.0.2 255.255.255.0 set IP

#

Interface gigabitethernet0/0/0

IP address 12.0.0.2 255.255.255.0 IP

#

Interface GIGABITETHERNET0/0/1

Eth-trunk 4 Add interface to Eth-trunk 4 (link aggregation)

#

Interface GIGABITETHERNET0/0/2

Eth-trunk 4

#

Interface NULL0

#

RIP 1

Undo Summary

Version 2

Network 23.0.0.0

Network 12.0.0.0

#

ar3==========================================================================================

#

DHCP Enable DHCP enabled

#

Undo DHCP Server BOOTP

#

IP Pool Vlan30

Gateway-list 192.168.30.1

Network 192.168.30.0 mask 255.255.255.0 set address pool

Dns-list 3.3.3.3 4.4.4.4

#

Interface Eth-trunk4

Undo Portswitch switch from two-layer mode to layer three

IP address 23.0.0.3 255.255.255.0

DHCP Select global address pool is used for DHCP clients

#

Interface gigabitethernet0/0/0

Eth-trunk 4 Add interface to Eth-trunk 4 (link aggregation)

#

Interface GIGABITETHERNET0/0/1

#

Interface GIGABITETHERNET0/0/2

Eth-trunk 4 Add interface to Eth-trunk 4 (link aggregation)

#

Interface NULL0

#

RIP 1

Undo Summary

Version 2

Network 23.0.0.0

#

This article is from the "10991541" blog, please be sure to keep this source http://11001541.blog.51cto.com/10991541/1772686

DHCP Relay Ethernet Link Aggregation