Diagram of DNS server address settings

Client DNS server address configuration steps
(Windows 2000, Windows XP operating system):
1, after the boot on the desktop to select the icon "Network Neighborhood", click the right mouse button, in the pop-up menu select "Properties" Item,
Open the Network and Dial-up Connections window, as shown in Figure 1:

Figure I

2, in this window select the icon "Local connection", click the right mouse button, pop-up menu select "Belong
, open the dialog box "local connection Properties," as shown in Figure 2:

Figure II

3, in the above dialog box with the mouse selected "Internet Protocol (TCP/IP)" option, with the left mouse button click on the following
Properties button to open the Internet Protocol (TCP/IP) Properties dialog box, figure 3 below:

Figure Three

4. Configure the DNS server address option in the dialog box shown in Figure 3:
4.1 PPPoE and L2TP dialing user
In this dialog box, select the option "Automatically obtain IP address" and "Automatically obtain DNS server address", as shown in Figure 4 below,
Then press the OK button to save the configuration changes. By doing this, you can complete the DNS server address of this computer
Configuration modifications.

Figure Four

4.2 All dedicated lines, shares, and clients manually configure the DNS server, in this dialog box, enter the preferred DNS
Server: 218.108.248.200, "Alternate DNS server: 218.108.248.228", figure 5 below, and then press
Below the "OK" button to save the configuration changes just now. By doing this, you can complete the DNS server for this computer
Address configuration modification.

Figure Five