Diagram of router bandwidth speed limit Setting Process

Vro broadband speed limit settingsBefore that, we need to know how much broadband we have subscribed to, and how many computers are sharing the bandwidth together. Here we will first use our broadband at 2 M and two people are using it at the same time, the IP address is automatically obtained as an example to set the router bandwidth speed limit.

1. Set automatic acquisition of IP addresses

Set the main parameters of the router first.

DHCP server: Enabled

Address pool start address: 192.168.1.2

Address pool end address: 192.168.1.3

Gateway: 192.168.1.1

Set the computer.

Right-click the network neighbor -- properties -- local connection -- properties -- double-click cp/IP protocol-> automatically obtain the IP address

Ii. vro broadband speed limit settings

1. Set IP bandwidth control

Check Before enabling IP bandwidth control. bandwidth Line Selection: ADSL line, uplink total bandwidth: 1024, downlink total bandwidth: 2048 (2 m here is 2*1024, 4 m is 4*1024), it is best to click "save ".

2. Set the IP bandwidth control rule list

I want to limit the bandwidth of two computers here, so I need to set two rules when setting. If you have set a router bandwidth speed limit, you need to delete all the original settings and click Delete all entries ).

Add a new entry> Configure an IP bandwidth control rule (modify the following parameters and use the default settings for others ).

Check Before enabling. Enter 192.168.1.2-168.192.1.2 in the address segment and set upstream to 512

Downlink: the maximum value is 1024 (this is the bandwidth limit value. The value 1024 equals 2048/2, or you can set a slightly larger value of 1200 ), finally, after setting all the parameters, click "save ". Then add the second-level rule, add a new entry-> IP bandwidth control rule configuration, enable (tick), address segment 192.168.1.3-192.168.1.3, upstream: up to 512, downstream: up to 1024, as above, click "save" after setting ".

Finally, to prevent others from modifying the IP address, we can add another rule, fill in 192.168.1.4-192.168.1.4 in the address segment, set upstream to 10, and downlink to 100

Do you know the steps of router bandwidth speed limit? Use your own Internet access device to perform operations.