Log on to the vro management interface and go
Wireless band settings, Select
Wireless works at the same time
2.4 GHz
And
5 GHz
Frequency band
UpperAnd then click
Save.
1
, Settings
2.4 GHz
Wireless network name of the frequency band
Enter
Wireless Settings
2.4 GHz>
Basic settings. Modify
SSIDNo.The name of the wireless network. ClickSave. You do not need to restart the vro during the configuration process. After all the wireless parameters are set, restart the vro.
2
, Settings
2.4 GHz
Wireless password for the frequency band
Enter
Wireless Settings
2.4 GHz>
Wireless security settings. Select
WPA-PSK/WPA2-PSK, Enter no less than 8 wireless devices
PSKPassword. Click at the bottom of the page after setting.Save Button.
1
, Settings
5 GHz
Wireless network name of the frequency band
Enter
Wireless Settings
5 GHz>
Basic settings. Modify
SSIDNo.The name of the wireless network. ClickSave.
2
, Settings
5 GHz
Wireless password for the frequency band
Enter
Wireless Settings
5 GHz>
Wireless security settings. Select
WPA-PSK/WPA2-PSK, Enter no less than 8 wireless devices
PSKPassword. Click at the bottom of the page after setting.Save Button.
Prompt at the bottom of the page
You have changed the wireless settings and will take effect after restart., Click
Restart.
Go to the router restart page. Click
Restart a vro
And
OK.
After the router is restarted, the wireless parameters are set successfully. The wireless terminal can connect to the modified wireless network.
