Diagram of wireless Internet sharing between two laptops

There are two laptops in the house, one broadband port and one network cable. How can I achieve simultaneous Internet access between two laptops?

Next, we will introduce a method for wireless Internet sharing for laptops. The specific steps are as follows (the settings in the XP system and Vista settings are as follows:Program).

First, select a notebook as the host. Open the "Network Connection" of the host, select "wireless network connection", right-click the Open Properties dialog box, and double-click "TCP/IP protocol" under the "General" tab ". Set the IP address and subnet mask to 192.168.0.1 and 255.255.255.0 (). Do not set the IP address or subnet mask. If the IP address conflicts with the Bandwidth IP address, restart the computer and try again.

 

Then, click "wireless network configuration" in the "Wireless Network Connection Properties" Window of the host, select "configure my wireless network settings in Windows", and click "advanced" at the bottom ", in the network to be accessed, check "only computer to computer (to be determined)". Do not select "automatically connect to a non-preferred network ".

 

This step is the key to creating a wireless virtual AP. On the "wireless network configuration" tab of the host, under the preferred network, click "add" to add an SSID to the Host:

 

Custom network name "DLL", network verification: open, data encryption: Web, network key: can enter 5 or 13 ASCII characters or 10 or 26 hexadecimal characters, do not select "automatically provide this key for me. You do not need to set a key, but we do not recommend this operation for the sake of the security of the wireless LAN.

 

Configure the "advanced" tab in "Broadband connection properties" of the host. Select "allow other users to connect to the Internet through this computer" and "Create a dial-up connection whenever a computer on the network tries to access the Internet ".

 

Extension settings are very simple. Repeat Step 1 and set "TCP/IP protocol attribute" to "automatically get IP Address" and "automatically get DNS server address". Click "OK".

 

Right-click "wireless network connection", select "view available wireless connections", and search for the new wireless network "DLL ", click Connect (the host and extension perform the same action). Then, the wireless local area sharing settings are successful.

 

At this time, we can view the wireless icon in the lower-right corner of each computer and find that "wireless network connection, speed 54 Mbps, signal strength is very good, and the status is connected ". The two laptops can access the Internet at the same time.