The disconnection fault of youxun wireless router is generally caused by two reasons.
I. Wireless disconnection, And the wired connection is very stable (1) check whether the wireless router of youxun is encrypted and set the encryption method to WEP; (2) check whether the wireless network card and the youxun wireless router are used in the same room. If there is an obstacle similar to the wall, the wireless network card and the youxun wireless router can be used at close distance without obstacles, determine whether it is unstable due to Signal Attenuation Caused by obstacles; (3) there are other wireless devices or microwave ovens, cordless phones (2.4 GHZ, microwave transmission devices) if different wireless devices use the same or similar channels, they will affect their respective signals. You can try to change the channel to eliminate this interference.
(4) reset or upgrade the device. 2. wired and wireless connection at the same time www.2cto.com (1) Check whether someone is downloading P2P software such as BT, Thunder, or donkey. If yes, try not to download it first to ensure stability; (2) check whether the PC is infected with viruses. If yes, handle the virus as soon as possible. (3) reset the device or upgrade the software. Note: before downloading and upgrading, see the version applicable to the software upgrade. For details about the upgrade and resetting operations, refer to the relevant documentation on the youxun router website. This article is from