We have explained a lot about the DHCP protocol and also learned about the DHCP service and related content of the DHCP server. Let's talk about some of its fault handling. This article mainly describes the settings of typical DHCP servers and the flowchart of DHCP fault diagnosis.
Fault Handling process of DHCP server based on global address pool
Typical Networking Environment
Before learning about DHCP fault diagnosis, let's take a look at the typical networking of the DHCP server, as shown in. The Fault Handling of DHCP servers based on the global address pool is based on this network.
In the following network diagram, the simplest solution is adopted. The client and server are in the same LAN, and GigabitEthernet1/0/0 is the connection interface between the server and the customer.
Figure DHCP server typical networking application
Configuration considerations
DHCP fault diagnosis process
For the network shown in, the client cannot obtain the address after the global address pool is configured. Use the following fault diagnosis process, as shown in.
Flowchart of global address pool DHCP Fault Diagnosis