Display and operate Windows Mobile on PC

Introduction

In Windows Mobile and wince development, it is essential to directly control the relevant devices on the PC. This article describes how to display and operate Windows Mobile on a PC, including using ActiveSync remote display and mymobiler.

Install ActiveSync

Regardless of the method, installing ActiveSync is required. Please download and install ActiveSync 4.5 at the following link.

ActiveSync remote display

ActiveSync remote display is a remote display tool provided by Ms. The current version needs to be downloaded and installed together with power toys.

However, I found this version is not easy to use.Cerdisp2.exeCopy the file to the Windows folder of the device. Refer to this articleArticleUse ActiveSync remote display on Windows Mobile 5 and 6 Devices

I have added an ActiveSync remote display, installed without manual installation, and deployed on the device. I just need to click remotedisplay.exe to start it, provided that the device and the connection are ActiveSync. This versionProgramWill automaticallyCerdisp.exeYou do not need to manually deploy the copied device folder.

I want to upload this file for beginners. Activesyncremotedisplay.rar

ActiveSync remote display can connect to any device, including real Windows Mobile devices, for example.

 

Simulator. Cradle is required before connecting to the simulator.

You can also connect to the wince device.

 

However, sometimes ActiveSync remote display fails. Last week, ActiveSync remote display on two computers could not connect to my cell phone, but could access ActiveSync and view files. In addition, ActiveSync remote display on the same computer can connect to other Windows Mobile devices and wince. However, the following dialog box is displayed every time my phone tries to connect. I greeted Baidu, Google, and Bing n times based on the principle of Asking About Baidu, asking about Google, and asking about things, the article on Baidu is about how to use a mobile phone as a camera, and Google does not have the result of this problem. It has not been resolved for a few days.

In the pop-up dialog box on the device during connection, use mycycler to intercept.

On the PC, only a blank area is displayed.

I always suspected that it was a problem with my device, and even I had to refresh the Rom. Later, we found that we only needed to remove the "allow connections to one of the following:" option of ActiveSync's "connection settings", reconnect, and then hook up and reconnect. The phenomenon is strange, and the cause is not identified.

 

Mycycler

Due to the failure of ActiveSync remote display, we can use mymobiler and mymobiler to download and install them here. Http://files.brothersoft.com/internet/mobile/MyMobile123.exe

Mymobiler does not need to be manually deployed and used directly. It also provides functions such as video recording, which is easier to use than ActiveSync remote display. It is recommended.