Dlink DI-504 router settings Diagram

Dlink DI-504 router settings Diagram

Dlink vro sets the physical connection of the vro
For example, there are four types of routers: LAN, WAN, reset, and power supply. A lan is a computer used to connect to a LAN. a wan is used to connect a cat or other Internet lines. The reset button is used to reset the router program. Www.2cto.com

Network Connection Dlink router settings

Dlink vro setting Client IP Address Settings
Right-click Network Neighbor Properties

Right-click the local connection to connect to the vro.

In the local connection properties, select TCP/IP and click Properties www.2cto.com.

In TCP/IP, you can choose to automatically obtain the IP address or manually enter it. manual input must be an IP segment with the router, generally, if the IP address of the DLINK router is 192.168.0.1, the IP address we set must be 192.168.0.X (2-254). Generally, users who are not familiar with it are advised to automatically obtain the IP address of Quzhou to assemble the computer.

Test whether the connection is communicating with the vro. Enter ping192.168.0.1 and click "OK" at the start of the operation.

The following figure shows that you can communicate with the vro. Www.2cto.com
Dlink router settings
First, log on to the vro. in IE, enter the IP address of the vro, that is, http: // 192.168.0.1. The window for entering the user name and password appears. It is usually written behind the vro. Generally, the admin password is blank. Log on to the vro interface, as shown in figure. Click the settings Wizard to start setting. Click next and the system prompts you to set a new vro password because it is empty by default. Enter the new password and click Next to set the time zone of the router. In China, select GMT +. Then, click Next. In this step, select your Internet access method. For home ADSL Broadband Users, select pppoe. For fixed IP addresses, select a fixed IP address, after selecting the IP address, click the next step for setting the fixed IP address user, as shown in. Fill in the information provided by the ISP. Www.2cto.com if you are a PPPOE user, enter the account and password provided by the ISP, and click Next to complete the settings. Then you can surf the Internet and set the router. This is the whole process of Dlink router configuration. I hope you can follow the steps shown in the figure carefully. I believe you can set it successfully.