first, shielding hard disk method
Set up the master-slave relationship and connect the two hard drives correctly, then turn on the boot into the BIOS setup program. In the Standard CMOS Features option, set the from disk parameter entry to NONE, shielding the from disk. Set the primary disk as the boot hard drive in the Advanced BIOS Features option. When you save the settings and restart, the hard drive letter is arranged in the order of the main, from the disk's partitions. The disadvantage of this approach is that the disk can only be used normally under Windows and is not recognized in pure DOS mode.
Ii. Re-zoning law
After setting up the master-slave relationship and connecting the hard disk correctly, use any partition software to delimit all the disks from the disk into logical partitions, then the letter from the disk will be placed in order on the back of the main disk.
Third, repair windows
Open the Control Panel → administration tools → Computer Management, expand storage → Disk management, right-click the partition you want to adjust, select the "Change Drive name and path" option, click the "Edit" button, and then adjust your work.
Note: The set drive name can only be unused, and when the setting is complete, a warning window pops up, saying that the operation may cause the drive to stop, regardless, and click OK.
Iv. Use of PartitionMagic
PartitionMagic (Division magician) can repartition the hard disk, format, copy partitions, and other operations, use it to modify the letter operation method is as follows:
Start PartitionMagic, right-click the letter you want to modify, select advanced → modify drive letter from the shortcut menu, then select the new letter in the Change Drive letter window that pops up, click OK, and then select the general → apply changes command to restart as prompted.