Radio and television broadband network cable connected to the WAN Port B router;
B Router WAN port to set up radio and television automatic dialing;
b Router LAN ip:10.11.12.10;
2 Unicom Broadband Light cat lan1 Port network cable connected to a router's WAN port
A router WAN port set unicom automatic dialing;
A router LAN ip:10.11.12.1;
A10 f620 LAN ip:10.11.12.1;
3Pc End ip:10.11.12.2;
Gateway: 10.11.2.1, 10.11.2.10;
Take a short network cable to connect the LAN port of router A and B;
Select any router LAN port to connect to PC
Network speed
Connection succeeded, displayed as two networks
With 360 network speed, radio and television broadband less than 500k/seconds, Unicom broadband for 1.35m/seconds, superimposed after 1.85m/seconds.
PC end up on the radio and television dial-up router, so the display for the telecommunications
At the same time download 3 game test download speed stability in 1.85m/seconds above, peak over 2m/seconds
Accidental Harvest: Inadvertently found that A10 f620 lan2 mouth is open, so unplug the B-router radio and television lines, connect Lan2, and set up Unicom dial-up, unexpectedly is unicom bandwidth double overlay
Triple Mesh Overlay
Just got a tp-link m406 router, decided to implement triple-net overlay
Set up router c dialing, LAN IP and router A, b the same network segment PC side Settings Gateway: order for Routers C, A, B,
Look at the speed, ox x, Thunder download Stable 3.2m/s
Unfortunately, the mobile phone can not set multiple gateways, but 10M broadband is enough
Just finished Holland's game against Chile.