Download, install, and use jbpm

1. Download

Log on to the following website:

Ii. Installation

1.decompress the jbpm-4.zip file, the author decompressed to D: \ programerfiles \ jbpm-4.4 directory.

2. Open myeclipse and expand the following menu:

Help> myeclipse configuration center> Software

3. Click Add site in the upper left corner.

4. Select Add from archive file, browse and select the jBPM-4.4 \ install \ SRC \ GPD \ jbpm-gpd-site.zip file, write a name and click OK

5. Now the personal sites on the left should have displayed jbpm4.4, expand it at the first level, and right-click the following eight items and select "add to profile"

6. The software updates available in the lower right corner will display the jbpm plug-in you want to install.

7. The network must be disconnected at this time! Click Apply 8 changes to start installation.

8. The installation is started ..

9. After successful installation, restart myeclipse.

3. Use the jbpm process designer

Right-click SRC ------- "Other ----------" and select jbpm4 · ---------- under JBoss jbpm. Then the jbpm process designer can be used.

As shown in: