Dsl-2740el DLink Wireless router, cat, Internet settings

LAN Environment:

192.168.1.1/24

1 Router LAN port connect PC, Web open 192.168.1.1

2 Click the Setup Wizard, select Ethernet, and then select Dynamic IP.

3 Set up the wireless network, set the SSID wireless network name, select WPA2 encryption mode, set the shared secret.

4 Disconnect the computer from the router, connect the router WAN port to the LAN

5 Connect set up router wireless network, open notebook open web, address 192.168.1.1, access router

6 Set the router IP address of the local network (default address 192.168.1.1), isolated from the original LAN, for example, set the IP to 10.0.1.1. This address is used for web management routers, masks and DHCP are not set by default, and you can click Apply to get on the wireless network

This article is from the "Red Maple" blog, please be sure to keep this source http://redmaple34.blog.51cto.com/2621361/1743462

Dsl-2740el DLink Wireless router, cat, Internet settings