Dynamic routing distance Vector routing protocol RIPR1 Connection R2 connection r3r1 ip192.168.12.1 R2 ip192.168.12.2,192.168.23.2 R3 ip192.168.23.3,lo:3.3.3.3r1 (config) # int S0/0r1 (config-if) #ip add 192.168.12.1 255.255.255.0r1 (config-if) #no shutR1 (config) #router ripR1 (config-router) # Network 192.168.12.0r2 (config) #int s0/0r2 (config-if) #ip add 192.168.12.2 255.255.255.0r2 (config-if) #no shutR2 ( CONFIG-IF) #int s0/1r2 (config-if) #ip add 192.168.23.2 255.255.255.0r2 (config-if) #no shutR2 (config-if) #exitR2 (config) #router ripR2 (config-router) #network 192.168.12.0r2 (config-router) #network 192.168.23.0r3 (config) #int s0/0r3 ( CONFIG-IF) #ip Add 192.168.23.3 255.255.255.0r3 (config-if) #no shutR3 (config-if) #int loopback 0r3 (config-if) #ip add 3.3.3.3 255.255.255.0r3 (config-if) #no shutR3 (config) #router ripR3 (config-router) #network 192.168.23.0r3 ( Config-router) #network 3.0.0.0r3 (config-router) #endR3 #ping 192.168.12.1Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.12.1, timeout is 2 seconds:!!!!! Success rate is percent (5/5), round-tRIP Min/avg/max = 92/101/128 ms
Dynamic routing distance vector routing protocol RIP