Dynamic interception and Remote Wake-up of Tenda routes

This article describes the dynamic interception and Remote Wake-up of Tenda routes. It is very practical when you set up a vro. For many network administrators, you only need to set these two aspects, it is quite convenient to manage routers. Let's talk about the dynamic interception and Remote Wake-up knowledge of tengda routes in detail.
1. The tengda router firewall log option provides an attack dynamic Interception Function. After this function is enabled, the system firewall logs are observed in real time. If any attack or scan information is detected, will take the initiative to respond accordingly. Www.2cto.com
1. If the system alarm sound alarm is selected, the system will issue an alarm when the system discovers an attack. 2. If the IP address is blocked, the firewall will block communication between the host and the router when the system discovers an attack. The blocking time is set as needed. 2. Remote Wake-up is a technology used by NICs to work with other hardware and software to enable remote boot through the LAN. With this technology, we can remotely control the router startup as needed, it is ideal for environments that require remote network management. Some network administrators especially like this function. 1. Go to the system tool-remote wakeup page on the home page of the tengda router, and enter the MAC address of the remote computer Nic and the IP address of the remote computer. Www.2cto.com 2. pre-defined remote wakeup information, which can store the Computer Information of remote wakeup. Each record occupies one line. Format: MAC address IP address (optional) comment.
After reading the above introduction, do you think it is very simple? In fact, this is actually a very simple thing. Modern routers are becoming more and more humane, making it easier for us to effectively manage the network.