Easily install WIN7 with USB stick

For detailed illustrations, please click here:http://www.docin.com/p-624698990.html
I. Production DRIVE USB stick
1. First download WIN7 original boxed installation disk image download software first
2. Then download UltraISO PE 9.3.5.2716
：
thunder://qufodhrwoi8vehvubgvpmi5ncmvlbmrvd24uy24vmjawog85z2qvlziwmdkwos9vbhryyultty5legvawg==
3. Then plug in the USB stick, run UltraISO-File---Open-open WIN7 ISO image file
4. Click Start---Write to hdd image ....
To ensure that the recording is correct, tick the burn validation
Point convenient start Write usb-hdd+

5. Click Write to start writing note the USB flash drive will be formatted with data please back up
USB disk Startup Disk production completed
USB Stick is occupied 2.44G Note that your USB stick is big enough.

Two. Installing WIN7
Restart the computer, enter the BIOS settings boot start setting USB-HDD u disk boot priority boot
The system automatically runs the WIN7 Setup program from the USB stick. I remember when ...
I chose to install the flagship version.

WIN7 installation must require partition to NTFS,, the installation interface to the right of the advanced in can format the partition.
After installation is complete
For detailed illustrations, please click here:http://www.docin.com/p-624698990.html

Do not activate the registration code during installation without input
Another sign-up I'm using is WIN7 activation software activation.
Installation complete 15 minutes ....

USB stick is convenient to carry.

Easily install WIN7 with USB stick