Easy to turn the U disk into a hard trick

Download the "ChipGenius.exe" software.

After downloading, plug in a U disk, open "ChipGenius.exe" software,

Download the corresponding mass production tool via the "chip model" or "Data download". (Note: The author of the U disk because it erased this information, so the display "did not find" "vacant")

Open My computer to confirm the USB drive is connected:

The author of the U disk chip model for sm3255ts, and download to the corresponding mass production tools. Open Sm32Xtest.exe

Click Scan USB (F5) ("Scan USB" in Chinese) or press the "F5" key directly.

We found the USB disk has been shown in the software interface. Next Click "Setting" (Chinese "settings" means).

Enter the software default password in the Password entry box that appears: two spaces. Click "OK"

The following interface appears click on "Open (O)" To enter the configuration file settings interface.

In the file settings interface has a personalized settings, such as the author entered their own QQ number and cell phone number and hit the "Rice" label volume name. The special emphasis here is that "USB-HDD" must be selected at "Type", otherwise it will not succeed!!! After the completion of the configuration click on the lower right corner "OK", exit the Configuration interface.

Back to the main interface of the software, click "Start (Space Key)" (Chinese "start" meaning, or directly to the SPACEBAR), at this point, the mass production began.

Until the word "OK" appears green, click "Quit" and exit the software.

Next, please unplug the U disk directly, do not need to "safely remove hardware and eject media" operation.

Unplug the U disk and then plug in the U disk again, the computer will be prompted to find new hardware, a few seconds, open My computer, see the local disk in a column of new letter:

Then go back to the desktop, right-click on my Computer, and click the "Manage" option.

Go to the Computer Management interface and click Disk Management.

Wait for the computer to load for a moment, you can see the diagram interface. Where "Disk 0" for the computer hard disk, "Disk 1" for u disk changes to the "hard disk."

Right-click Disk 1, or delete volume. When prompted, select Yes.

At this point, Disk 0 becomes black-unassigned. Right-click to select New Simple Volume (I) ....

In the New Simple Volume Wizard dialog box, click Next (N).

Enter a value for the simple volume size, the author loses "1000MB" and clicks Next (N).

Click Next (N) until finished.

At this point, we can see the new volume (K:) and unassigned Two extents, right click Unassigned, and select New Simple Volume (I) ... "repeat."

At this point, a new volume was completed.

Open "My Computer" again to see if the local Disk column is out of two new drive characters?

Now, you can classify files in a USB drive, even if one of them is poisoned, you need to format the file without affecting the other disk.

Also need to explain, the author only divided two disk, if your U disk capacity is larger, you can according to the above operation points more disk, as long as you like!

It's not finished. There is also a wonderful DIY bright spot, we entered the QQ number, telephone number and other information, it is here-

Finally, safely remove our DIY "removable hdd", over!

The above steps seem to be very cumbersome, but if we through their ability to turn u disk into a hard drive, not only let our public and private documents separate management, more important is to avoid the need for a U disk poisoning after formatting so that more documents are not affected, is not very practical? Friends who are interested will try it.