Enable communication between Linux systems and Windows hosts on virtual machines

One: Configure static IP

1: Switch to graphical user interface with STARTX naming;

2: In "Start"--"System Setup"--"network"--eth0

The IP will be changed to statically bind IP via DCHP auto-acquisition

IP address: Fill in the IP you want to give, you need to match one of the network card in the Windows system to maintain the same number of IP segment

The first three bits are the same, the latter a different

Subnet Mask: 255.255.255.0

Default gateway: 192.168.1.1

The above configuration can be.

3: NIC Adapter settings

Click "Virtual Machine"--"settings"--"Network Settings"

Network mode select Only-host (host mode only), which will initiate the connection and the connection is checked.

4:reboot Restart the machine or service network restart Restart services

Enable communication between Linux systems and Windows hosts on virtual machines