Enable LSI 2208 Array Card JBOD mode

Source: Internet
Author: User

About the LSI 2208 array card is not enabled by default JOBD mode, how to configure as JBOD mode

1, the server boot press ctrl+y into the BIOS preboot CLI interface


2. Enter the command:

$ Adpgetprop Enablejbod-aall (can be viewed to JBOD is disabled)

Adapter 0:jbod:disabled

Exit Code = 0x0

Enable JBOD

$ adpsetprop enablejbod 1-aall (enable array card JBOD mode)

Adapter 0:set JBOD to Enable success.

Exit Code = 0x0


3, restart the server and press Ctrl+h to enter the array card configuration interface, you can configure the hard disk as JBOD mode


This article is from the "BlueSky" blog, make sure to keep this source http://intbluesky.blog.51cto.com/2928051/1747116

Enable LSI 2208 Array Card JBOD mode

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.