Enable the ahci hard drive mode for the XP system (solve the Dell blue screen problem 0x0000007b)

 

Enable the ahci hard drive mode for the XP system (solve the Dell blue screen problem 0x0000007b)

After the XP system is installed in IDE or ATA mode,Enable ahci ModeThe blue screen will be turned on (Blue ScreenCode0x0000007b), Load the ahci driver in XP to enable the ahci option in BIOS to achieve the best performance of the hard disk.

First download the ahci patch:

Right-click --- save as target --- download to local hard drive

Additional Document 1: ICH8-SATA-AHCI-driver.exe

Additional Document 2: ICH9-SATA-AHCI-driver.exe (this is usually the case for new computers now) If you do not know whether it is ich9 or ich8, useEverest tool detects nanqiao chip Models Search for an Everest tool online and click the download page www.xdowns.com/soft/softdown.asp. Run ICH9-SATA-AHCI-driver.exe OpenICH9-SATA-AHCI-driver \ prepare Folder Run: Install. cmd Restart: Enable the ahci mode in BIOS. Start XP to discover hardware Specify the location for installation. Next Step Select, ICH9-SATA-AHCI-driver folder, OK Select, yes After you click Finish, the following message is displayed: Click Yes and restart again. After logging on to XP, openMy computer-> Management-> Device Manager-> ide ATA/atapi Controller The ahci hard drive patch has been installed.