Enterprise wireless signal is weak, not even on

It maintenance wonderful said: The Enterprise no line by the signal problem

Wireless signal is not good, one will be able to connect for a while, ping packet serious, restart and restore can be connected ...

Workaround:

1. Troubleshoot whether the wireless router is a hardware failure (call the manufacturer's phone)

2. See if the connected client has exceeded the maximum band capacity.

About 1000 yuan of wireless routing, I used the cisco:rv110w,rv120w, preferably not more than 15 (pro-Test), the official note is 30 this is not credible. Domestic has Hayter, Flying Fish star, about 600 yuan, with a measurement of about 20 can conduct management (pro-Test), the proposed growth of enterprises using domestic, cost-effective and convenient management, found that there is a problem, timely after-sales phone upgrade software version.

Suggest that when you buy, take the machine must be considered sufficient, can only be less

3. See if the wireless channel is conflicting. This is very key, take my enterprise example, no line by is placed in the cabinet inside, then two no line by at the same time in the cabinet inside, this signal conflict is very serious, is a break, a will not connect. Can manually change the channel, the two channels without the channel distance from the larger the better, can be repeated testing, you can also use tools, detection channels, such as: inssider Baidu direct download

4. Finally, it is suggested that behavior management, prohibit or limit the application, high-speed download applications, a high-speed download of an IP to drag down the entire router is very likely, especially wireless. Recommended here: Grass Gateway software and panabit behavior management software (pro-test is very convenient and practical)

This article is from the "Rich Master" blog, please be sure to keep this source http://7380705.blog.51cto.com/7370705/1677105

Enterprise wireless signal is weak, not even on