Error codes that appear in ADSL dialing

Error 602 The port is already open

Problem: dial-up Networking network cannot connect due to device installation error or is in use

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

　

Error 605 Cannot set port information

Problem: dial-up Networking Network cannot set use port due to device installation error

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

　

Error 606 The port is not connected

Problem: dial-up Networking network cannot connect required device ports

Reason: Raspppoe not complete and correct installation, cable fault, ADSL modem fault

Solution: Uninstall any PPPoE software, reinstall, check cable and ADSL MODEM

　

Error 608 The device does not exist

Problem: Dial-Up Networking network connection device does not exist

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

　

Error 609 The device type does not exist

Problem: Dial-up network-connected devices whose types are not determined

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

　

Error 611 The route is isn't available/612 the route is not allocated

Problem: dial-up Networking network connection routing is incorrect

Reason: Raspppoe not fully and correctly installed, ISP server failure

Solution: Uninstall any PPPoE software, reinstall, call the ISP to inquire

　

Error 617 The port or device is already disconnecting

Problem: Dial-up network connected device is disconnected

Reason: Raspppoe not complete and correct installation, ISP server failure, cable, ADSL modem fault

Solution: Uninstall any PPPoE software, reinstall, call ISP inquiries, check network cable and ADSL MODEM

　

Error 619

Problem: Unable to establish connection with ISP server

Reason: ADSL ISP server failure, ADSL telephone line fault

Solution: Check whether the ADSL signal lights can be synchronized correctly. Call your ISP to inquire

　

Error 621 cannot open the phone book file

Error 622 Cannot load the phone book file

Error 623 cannot find the phone book entry

Error 624 cannot write the phone book file

Error 625 Invalid Information found in the phone book

Problem: Windows NT or Windows Server network RAS network component failure

Cause: Software Installation Issues

Workaround: Uninstall all PPPoE software, reinstall RAS network components and Raspppoe

　

Error 630

Question: ADSL Modem no response

Reason: ADSL telephone line fault, ADSL modem fault (power not open, etc.)

Solution: Check ADSL equipment

　

Error 633

Problem: dial-up Networking network cannot connect due to device installation error or is in use

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

　

Error 638

Problem: After a long time, unable to connect to the ISP's ADSL access server

Cause: ISP server failure; You have incorrectly entered a phone number in a bad connection created by Raspppoe.

Workaround: Run its create dial-up Raspppoe.exe check that the ISP service is listed to make sure that the ISP is working, clear the phone number from the dial-up connection you are using, or keep only one 0.

　

Error 645

Problem: NIC does not respond correctly

Cause: Nic failure, or NIC driver failure

Resolve: Check the network card, reinstall the NIC driver

　

Error 650

Problem: The remote computer is not responding, disconnect

Reason: ADSL ISP server failure, network card failure, abnormal shutdown caused by error

Solution: Check whether the ADSL lights can be correctly synchronized, call the ISP inquiries; Check the network card, remove all the networking components reinstall the network.

　

Error 651

Problem: The ADSL Modem report has an error

Reason: Windows is in Safe mode, or another error

Resolve: When this error occurs, redial, you can report a new specific error code

　

Error 691

Problem: Wrong username and password entered, unable to establish connection

Reason: Wrong username and password, ISP server failure

Workaround: Use the correct username and password and use the correct ISP account format (Name@service) to call the ISP for questioning.

　

Error 718

Problem: The remote computer timed out without responding when authenticating the user name, disconnecting

Reason: ADSL ISP server failure

Resolution: Call the ISP to inquire

　

Error 720

Issue: Dial-up Networking cannot coordinate protocol settings for servers in the network

Reason: ADSL ISP server failure, abnormal shutdown caused network protocol error

Resolve: Call the ISP to inquire, remove all network components and reinstall the network.

　

Error 734

Issue: PPP connection Control Protocol aborted

Reason: ADSL ISP server failure, abnormal shutdown caused network protocol error

Resolve: Call the ISP to inquire, remove all network components and reinstall the network.

　

Error 738

Problem: Server cannot assign IP address

Reason: ADSL ISP server failure, ADSL users too much more than the ISP can provide IP address

Resolution: Call the ISP to inquire

　

Error 797

Problem: ADSL modem connection device not found

Reason: ADSL modem power not open, network card and ADSL modem connector problems, software installation after the corresponding agreement is not correct state, in the establishment of dial-up connection, the establishment of the wrong empty connection

Resolve: Check the power supply, connectors, check the network properties, Raspppoe the relevant protocol is correct installation and correct state (related protocol), check the network card appears? number or! number, set it to enable; Check the properties of the dial-up connection and whether the connected device uses an ISDN Channel-adapter Name (XX), the device is an empty device, if you use to cancel it, and choose the correct PPPoE device instead of it, or re-establish the dial-up connection.