ESP&EFP Mode WIN10 System reload (actual combat win10+uefi boot loader system (does not reload the plate 100%)

Source: Internet
Author: User

Before issued an "actual combat win10+uefi Boot system (do not reload 100% success)" article, today in the production of friends, found a missed step (rebuilding the boot section, before someone card Windows logo that, it is estimated that the boot point error!). ), Halo ... Republish Now! It's going to be okay this time!
Generally want to use UEFI, the BIOS+MBR format must be converted to UEFI+GPT format, but to the MBR format to GPT, only after the format of the motherboard after the UEFI boot, go to the installation disk to reinstall. But to install the system + Software + a bunch of things very troublesome ... So now there is a new approach, as long as the UEFI+MBR (do not change, do 2 ways to start, do not affect each other!) )
Turn: Some experience about UEFI+GPT:
"Uefi+gpt and Bios+mbr Interchange (no reload system, lossless data)":
I follow the online tutorial, there are 2 places can not be successful, after the attempt, combined with the above 2 articles finally settled! Below to share with you!
1, enter the PE, open Diskgenius software (4.0 version above only adjust the partition size option), adjust the space in front of the C drive (it doesn't matter if you have a few hard disks in your machine, the C disk WIN10 is the first hard drive), empty 100M (after the boot file will only use 25.7MB space).

---------------Right-click to adjust partition size

-------------Red Part input 100MB

2. Set the partition to the empty gray disk space, and designate it as the EFI partition.

---------------------Remember to select "Primary Partition", the format must be EFI

When-----------done, click Save Changes.

-------------If this dialog box appears, remember to click "Delete"

Fix Windows Boot---------------(previously leaked)
Open the Bcdtools software and discover the Windows boot Loader (boot default boot entry) the device becomes Unknow (the location of the original partition has changed since the partition was resized)

---------------Double-click on it and select the partition letter (my C:) where your system is located, OK!

If you have trouble, you can repair it directly!

3, "Now reboot can go into Windows!" "This step is critical, Diskgenius and online tutorials are not able to give the EFI drive letter assignment (the Diskgenius is always gray, if you direct dot format, the EFI (ESP) partition will be cast to your formatted partition format, so it fails. And the kind of search to use the cmd command line input type, has been prompted not to select the partition, so it is not! You must then specify the drive letter for the newly created EFI partition (after the software is attached) by doing the following.

---------------------Start Bootice boot repair software, select the hard disk on which your system resides

--------------------Select "Partition Management".

------------------Select ID must be the section of the EF, usually the first, the point "assign the letter", the drive letter is arbitrary, I chose an "X" (here the drive letter related to the following to guide the establishment of the command line)

After the-------------------allocation, the Red section appears the drive letter you set (I just selected "X"), then click "Format", remember that the selection must be "FAT16"

---------------all finished style (file system changed to "FAT16")!

4. Enter the command to refer the boot information to your ESP partition. Where the "X:" is the drive you selected before! After successful execution, you will be prompted to "successfully created the startup file," and then prepare to restart the BIOS boot entry for UEFI! The command line is as follows:

BCDboot c:\windows/f uefi/s X:/L ZH-CN

5, start (depending on the computer, point del or F1\F2) into the BIOS, and then find the boot Mode
Legacy is the normal mode, UEFI is what we want!

★uefi turn back is relatively simpler than the above (in fact, do not do the following steps, the direct BIOS switch back can, according to my tutorial completed 2 ways coexist). If you want to reload the system, it is OK to use the Ghost version directly or even reload it directly. I'm not going to do it all, steps are as follows:
1. Enter PE
2, open the Professional version of the Diskgenius
3. Remove the EFI partition
4, can be deleted from the EFI partition into your C drive, can also be (also 100M, forget it, and then change back to save a step).
5, remember, certain points diskgenius menu "hard disk"-"Rebuild partition Table"

★ If you set up Uefi, and found that unable to shut down properly, it is due to the system's "Quick start" caused! Cancel out and enjoy!!!

The UEFI mechanism is similar to the "fast start" mechanism, except that you will find
UEFI is a real fast start, the computer system to boot some of the hardware check files written to the Uef startup file, so that the computer will not start the time of trouble-consuming hardware detection and drive detection, etc.
The "Quick start" inside the win system simply writes some messages that were checked during the last boot to a file when you shut down the machine, and then loads it when you boot up to achieve the purpose of fast start.
The difference is:
UEFI is a real shutdown after booting (this is accelerating startup time and requires motherboard support)
"Quick Start", not restart, and sleep is similar, if you encounter the need to restart to take effect after the software or hardware installation, you point "later", then shut down the computer, the next time you turn on, you will also be prompted to "restart"! If you click "Restart", how slow your computer started, or how slow! (You can look at the computer startup time, in fact, it is cumulative, only after restarting, will be calculated again!) )
If you have these in your BIOS, please set the
Secure boot set to Disabled〖 disable startup security check
OS optimized set to others or Disabled〖 system type settings
CSM (Compatibility support Module) is set to Yes
Uefi/legacy boot option selected into both
Uefi/legacy Boot Priority selected as UEFI first

ESP&EFP Mode WIN10 System reload (actual combat win10+uefi boot loader system (does not reload the plate 100%)

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.