Establish a network connection in the Windows Mobile simulator (emulator)

Because you want to use Windows Mobile emulator for network communicationProgramSo find a method to configure the network connection of the emulator. I found someArticle, Many say that virtual PC 2007 needs to be installed. For example, the following article
Enable network connection Windows Mobile 6 emulator

If you need Virtual PC 2007, you can download it here
Http://www.microsoft.com/downloads/details.aspx? Familyid = 04d26402-3199-48a3-afa2-2dc0b40a73b6 & displaylang = en

I do not need to install Virtual PC 2007 for configuration proof. The configuration method is as follows:

1. Configure the network of emulator, enable ne2000 PCMCIA network adapter and bind to: and select the real network card on the PC.

2. Choose Start> Settings> Connections tab> connections> network cards.

3. Click ne2000 Compatible Ethernet driver to view IP address information. The system will bind the IP address of the network card on the PC. The IP address on the PC is 192.168.1.49.

4. start-> Settings-> Connections tab-> connections-> Advanced tab-> select networks, select "My Work Network", where my work network represents the configuration in Figure 2.

5. Open your browser and access Google for testing.

6. Access the aps.net website on the PC for testing. The IP address on the PC is 192.168.1.49.

In this way, emulator can test network communication programs and access internet systems.

The above is method 1, and method 2OceanStudents provideYou can use ActiveSync or Windows Mobile Device Center to select DMA as the connection method. Then, right-click the simulator in the Device Manager and choose cradle, then the simulator is connected to ActiveSync, so that you can directly use the local Internet through ActiveSync, which is very convenient."

For details, refer to how the Windows Mobile simulator of appleseeker accesses network settings.