Ethernet cable tester 12 seconds detection 6 lines

Fluke Networks (Fluke Network) has launched an ethernet cable tester "DTX-1800", in addition to the widely used "5e" line, it can also be used to detect "6" and "7" lines with better transmission characteristics. You can check whether the cables used as the measurement object meet the corresponding specifications. The testing frequency is up to 900 MHz. Reduce the testing time of the "6" line to 12 seconds, less than 4300 of the latter, compared to about 40 seconds of the company's original product "DSP-1/3. When testing the 7-class cable, you must install an adapter for sale.

"DTX-1800" to the right of the host) and sub-machine This product consists of a host connected to one end of the measurement cable and a child machine connected to the other end of the cable. The test method adopts the Frequency Sweep mode. Two microprocessor is used to divide the Frequency band into two parts for parallel processing, thus shortening the test time. Higher job efficiency is more conducive to lower costs.

Display Screen when testing faulty cables It not only has the test function, but also has the function of diagnosing cable faults. In the past, the fault location can only be displayed on the display, but now the handling method can be displayed. In addition, the section of the "Permanent Link Adapter" connecting the ethernet cable to the host and sub-machine is also made into a circular shape, which improves applicability and makes it easier to use. The section of the original product is elliptical. Use rechargeable batteries. The battery drive time is 12 hours, which is more than two hours longer than the company's original products. You can combine a host with multiple sub-hosts. The shape and size of the host and sub-host are both 21.6x11.2x6 cm, and the weight is 1.1. After you install another component, you can also test the optical fiber. "DTX-1800" is priced at 1.48 million yen about 0.11 million yuan 4000 yuan ). You can also buy a sub-machine separately. The price of the sub-machine is not determined yet. At the same time also listed the maximum testing frequency of 350 MHz, does not support the "7 class" line of the "DTX-1200" and the basic specifications with the original "DSP-4300", the battery drive for a longer period of "DTX-LT "".