Eve-ng Bridging to VMware hosts

1. Open The Virtual Network editor for Vmare,such as adding two virtual networks,VMnet2 NAT mode for Eve-ng Management network card;VMnet8 is the host for bridging to the Eve-ng network; Of course, the name of the network card can be defined by IP, see personal habits

2. Eve-ng virtual machine NIC and host information such as. This eve-ng virtual machine is installed as an IOS solution, and of course it can be entered with an OVA template ; specific installation method refer to the official website or Baidu

3. Modify eve-ng network card information,vi/etc/network/interfaces , of course, according to personal interests to change eth1 to DHCP mode, This requires the same information as the virtual network adapter established by VMware above.

4. Create a new machine on VMWARE, Windows can be Linux, I use linux . This linux build cacti is used to manage eve-ng Internal network,ansible for configuration. Network information is as follows, of course, this network card gateway is a Vlan on the eve-ng gateway, so you can get through the VM and eve-ng Internal network;

5. Test The connectivity of the VM Linux host to the Eve-ng Bridge network connection.

6. Topology diagram, bridging section settings.

Eve-ng Bridging to VMware hosts