Example: common setting methods for wireless broadband Routers

With the development of China's wireless routing industry, it has also promoted the rapid development of wireless broadband router technology. Here we mainly analyze the common setting methods of wireless broadband routers, TL-R4XX Series Wireless Broadband Router management address factory default: IP Address: 192. 168. 1. 1. subnet mask: 255. 255. 255. 0 TL-R400 and TL-R400 + two management addresses default: 192. 168. 123. 254, subnet mask: 255. 255. 255. 0) Use a network cable to connect the LAN port of the Wireless Broadband Router to the computer Nic.

The Ethernet port on the Wireless Broadband Router has the polar automatic flip function, so no matter whether your network cable uses a direct line or a cross line, you need to ensure that the cable crystal head is secure and stable, the copper pieces of the crystal head are not rusted. Right-click "Network neighbors" on the desktop and select "properties". In the displayed window, double-click "Local Connection" and click "properties ", find "Internet protocol TCP/IP)" and double-click the "Internet protocol TCP/IP) properties" window. In this window, select "Use the following IP Address" and fill in the corresponding location:

IP Address: 192. 168. 1. XX range: 2-254 );
Subnet Mask: 255. 255. 255. 0;
Default Gateway: 192. 168. 1. 1. After filling in, click "OK" twice.

Check whether the computer and Wireless Broadband Router can communicate

You can use the following method to view the DOS interface of your computer:
"Start"-> "program", click "MS-DOS" Win98 operating system)
"Start"-> "program"-"attachment", click "command prompt" Win2000/XP operating system)

First, check whether the above IP Address Configuration has taken effect? In the DOS window, enter ipconfig/all and press Enter. If the following information is displayed, the configuration takes effect. Second, send data packets to the LAN port of the Wireless Broadband Router to check whether the data packets can be returned? Run in DOS window:

Ping 192. 168. 1. 1;
Reply from 192. 168. 1. 1;
Bytes = 32 time <10 ms TTL = 128 Reply from 192. 168. 1. 1;
Bytes = 32 time <10 ms TTL = 128 Reply from 192. 168. 1. 1;
Bytes = 32 time <10 ms TTL = 128.

If the preceding information is not displayed after you press enter, and the prompt "not an internal or external command, or a program or batch processing program that can be run" is displayed, the command input is incorrect, check whether spaces and other inputs are ignored.